DW708 (Type 3) DeWALT Miter Saw - Parts

This is a genuine Dewalt replacement part, it is sold individually. The purpose of the Blade Adapter, is to make the bore of a blade that is 1 inch and reduce to a 5/8 inch bore. Making it possible to use a 1 inch bore blade on a 5/8 inch arbor.

This brush and holder assembly is a genuine Dewalt replacement part, not aftermarket or generic. _b_This item is sold individually_/b_. As pictured, this item includes everything you need to replace a brush in your power tool. The brush, holder, terminals, and spring are included and ready for installation. If you only need the carbon ...Read morebrush and not this entire holder assembly, you can purchase the brush separately (see the 'Related Items' section below). This brush and holder is compatible with the tools listed below, but it is not guaranteed to fit any other power tools. It is advised that you replace both brushes only if you think all you need is one.

This replacement screw is an authentic manufacturer sourced item. It is commonly used with a variety of power tools. This screw is a standard hardware which has multiple uses based on equipment. To ensure correct location and application of this item please make sure to check appropriate diagrams. It is made out of metal and it is sold in...Read moredividually. Requires a torx or a flat-head screwdriver to tighten/loosen this screw.

This Ball Bearing is sealed on both sides. It is a genuine replacement part and is sold individually. Ball bearings are used to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. This reduces wear on the too...Read morel and allows it to run smoothly. Bearings experience constant wear when the tool is in operation from pressure, heat, vibration and friction. Because of this, many Bearings need periodic maintenance or replacement.

This Genuine OEM carbon brush is an essential replacement part designed for use with a variety of DeWALT and Black & Decker saws. Sold individually, this high-quality component is made to conduct electrical current within the motor, enabling efficient power transfer and tool performance. Over time, carbon brushes naturally wear down due t...Read moreo friction and electrical contact, which can lead to intermittent motor issues or failure to start. Measuring 3/4 inch in length, 1/2 inch in width, and 1/4 inch in thickness, this brush is built to original specifications for a precise fit. When replacing carbon brushes, it’s important to also inspect the motor’s armature for signs of burns, cracks, or other damage, which may indicate a more serious issue. A hex key or screwdriver may be required for installation, depending on your tool model.

This OEM Universal dust bag fits all of the DEWALT miter saws. It comes with the adapter which is not sold separately. Please note some DW718 Models may require an adapter part #618240-00 to make it work. The purpose of the dust bag is to capture sawdust to keep your shop and your work surface cleaner.

This is a genuine manufacturer-sourced component which is specially made for DeWALT saws. It provides an identical replacement for a missing or a faulty part that was installed on a new unit. The purpose of the part #153555-00 belt is to drive the gear assembly that connects to the drive shaft to rotate the blade. Unfortuanetly, over time...Read more it can wear out, break or get stretched eventually requiring a replacement to ensure peak performance. Keep in mind this high-quality belt is made of durable rubber and is sold individually. We have an article and video on how to do this repair. Quick Fix: How to Replace the Belt on a DeWalt DW708 Miter Saw .

This is an Original Manufacturer Approved replacement part used on some Compound Miter Saws. This part is made out of Metal and it is Sold Individually. The purpose of this Clamp is to help securing a Blade to the unit.

This is a genuine OEM sourced replacement part designed for use with a variety of power tools. This is a standard hardware which has multiple applications based on your tool. For proper use please refer to diagrams. This is a metal torx T20 metal screw which is sold individually.

This is an authentic DeWalt replacement part that has been sourced from the original manufacturer to be used with miter saws. The metal pulley key is used to link a rotating shaft and a pulley to allow the two parts to rotate in unison. This pulley key is priced as a single item.

This flanged sleeve, also known as a bushing or sleeve bearing, is responsible for securely connecting the guard link assembly to the upper guard assembly in your miter saw. It maintains stability and proper alignment between these two components. The guard link is the part that attaches to the blade guard and is responsible for lifting t...Read morehe guard when the saw blade is lowered. If you notice that the flanged sleeve is worn, damaged, or has excessive play, it can cause the guard link to become wobbly, restrict its movement, or produce unusual noises during operation. To replace the flanged sleeve, you will need a screwdriver with a Torx bit. Simply unscrew the screws on each end of the guard link to remove it along with the flanged sleeves. It is important to note that this replacement part is an authentic OEM component and is sold individually.

This Kerf board is a genuine DeWalt replacement part., it is sold individually. 2 are needed to complete the set. It is plastic and has 3 screw holes to secure it to your saw. Kerf plates (also called kerf boards) are used to prevent excessive splintering, resulting in cleaner cuts. Using a worn or broken kerf board in your tool can result in a rough edge to the material you're cutting.