DW708 (Type 1) DeWALT Miter Saw - Parts

This replacement field is specially designed for use with Bosch miter/circular saws. In conjunction with an armature it is what drives the unit. A field is usually damaged by overloading the power tool, or because of a bad armature. It is highly recommended to replace both carbon brushes when replacing a field. This item is sold individua...Read morelly. To complete this repair you would need a screwdriver. • Make sure the saw is unplugged • Remove brush covers and take out brushes • Remove the cap and the housing screws • Once the housing is removed you will have access to the field • Disconnect all wires leading from the field • Take out old field and replace it with a new one • Re-connect all the wires • Re-assemble the motor

This is an authentic DeWALT replacement part. The washer is found in miter saws and lawn mowers from DeWALT and Black & Decker. This is a metal part, generally used to secure and protect the connection with a screw or bolt. It may be located in different parts of the machine, depending on model. Please be aware that there are differen...Read moret washers used in the machine. Refer to the parts diagram to be sure of ordering the correct part. You may require a screwdriver or wrench when replacing this part. This item is sold individually.

This is an authentic DeWalt replacement part that is sourced from the original manufacturer for use with miter saws. The metal spring is used to provide compression for the miter table adjustment handle and trigger. This item is available as an individual replacement part, please see illustrated diagram for associative parts.

This is an original DeWalt replacement part manufactured for use with power tools. The washer is commonly used to secure a part assembly with a bolt and helps prevent the bolt from loosening due to the tools vibration. This washer is used with various tool models, please see model diagram for part location and usage. The washer is sold individually.

This is a genuine Dewalt replacement bearing sleeve. It houses a ball bearing for secure seating in many Dewalt power tools. It is compatible with the Dewalt tools listed in the 'Compatibility' section below, but it is not guaranteed to fit any other bearings or power tools.

This replacement arbor bushing is a high quality OEM sourced item that is specially designed for Dewalt crosscut miter saws. It is the brushing that is used to support the saw blade. This durable metal item is sold individually, please note that the outer clamp and the blade bolt are both sold separately.

This is an authentic replacement part sourced from original manufacturer. It is designed for use with compound miter saws. The purpose of the retaining ring is to secure the roller guard the the lower guard. It is made out of metal and it is sold individually. You would need pliers to complete this repair.

It is an original manufacturer-supplied component which is made for Back and Decker and DeWALT compound miter saws. This special roller attaches to the guard to protect it from direct contact with work material. Over time it may wear out and get damaged eventually requiring a replacement. One durable rubber roller guard is made of high-qu...Read moreality material and is sold individually. Note, the hardware to secure it is sold separately. Replacing it is a simple task that should only require pliers.

This is a genuine replacement part designed for use with compound miter saws. It is supplied directly from original equipment manufacturer. This wing knob helps to secure upper and lower handles on a mower. It is made out of black plastic with a metal shaft and it is sold individually. Please note the lock nut is sold separately.

This is an authentic component which is sourced directly from the original equipment manufacturer for use with DeWALT crosscut miter saws. It is an identical replacement for a missing or faulty component that was originally installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the correct locatio...Read moren and application of this part. Keep in mind this high-quality bevel knob which is made of durable plastic with metal and is sold individually.

This part is an OEM from the DeWALT manufacturer. The spring washer is compatible with many miter saw devices. The metal washer is fitted between the arm and the spacer. The item, creating a spring force between components. The spring washer is sold individually. A screwdriver, hex key and a wrench may be required for the removal and replacement.

This is a replacement part sourced directly from the manufacturer for DeWalt miter and circular saws. The label (ident), has the DeWalt label on it and is screwed onto the miter and/or circular saw. A Phillip screwdriver will be needed to screw the label on and, it is also needed to remove the label. This part is made of plastic and is sold individually.