My Orders
DMO2420 Dacor Microwave - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Microwave was acting all crazy like my ex wife!
4 of 5 people
found this instruction helpful.
-
Bradley from GREEN BAY, WI
- Very Easy
- More than 2 hours
It took more than 2 hours to do this extremely delicate surgical type procedure! First I had to run to buy beer and chips to make sure I had all the necessary supplies needed. I opened a beer and surveyed the job.I carefully removed the crappy old waveguide cover, and had another beer while opening the package of the new waveguide cover.
... Read more
I then installed the new waveguide and proceed to have a few more beers while I admired my work and the awesome new waveguide from Part-Select. Later I put it to the test and heated up some left over buffalo wings, had a couple more beers and went to bed a happy man with the piece of mind that my new waveguide was up for the job!! Thanks Part-Select!
Read less
Was this helpful?
Thank you for voting!
Microwave makes loud noise and dies not heat.
2 of 2 people
found this instruction helpful.
-
ALVIN from BEND, OR
- Easy
- 30 - 60 mins
-
Screw drivers
Unplug. Remove hood. Ground capacitor. Photograph wiring. Remove magnetron. (2 wires, 4 screws). Replace and reassemble. Dispose of old unit. If you are ordering parts and are not into testing circuits order a new diode and difuser card as well. Replace all three.
Was this helpful?
Thank you for voting!