My Orders
DLL2550PE Hotpoint Dryer - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Just need it to replace the door switch
1 of 3 people
found this instruction helpful.
-
Julian from Elgin, IL
- Really Easy
- 30 - 60 mins
-
Pliers, Screw drivers, Wrench set
Removed the screws that hold the draying unit (barrel) to get accest to the back of the switch, and that's when I noticed that I will need the belt and I ordered to when my existing belt goes I have a replacement.
Other Parts Used:
Was this helpful?
Thank you for voting!
The drive belt on the trusty GE dryer, bought used from a GI in Germany about 40 years ago and donated to our relatives when we returned to the States finally broke and I airmailed them a new one.
0 of 1 people
found this instruction helpful.
-
JACK from Fairfax, VA
- Really Easy
- 15 - 30 mins
-
Nutdriver, Pliers
The repair was simple with my mechanic relative handling the tools. Total time about 25 minutes.
Previous repairs to the venerable machine with parts obtained freom Part Select and shipped to Germany: new drive motor and drum bearings.
Previous repairs to the venerable machine with parts obtained freom Part Select and shipped to Germany: new drive motor and drum bearings.
Was this helpful?
Thank you for voting!
Belt broke, drum wouldn't turn.
0 of 1 people
found this instruction helpful.
-
James from Brunswick, GA
- Really Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers, Wrench set
Pulled the top of dryer off. Separated the door from the drum seal or gasket, slipped the belt through, put the drive belt on the motor and then put it all back together.
Was this helpful?
Thank you for voting!
dryer belt broke
0 of 1 people
found this instruction helpful.
-
Carol from Wendell, NC
- Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers, Socket set
First I checked on-line "how to change a dryer belt" and followed the instructions. Remove front panel and slide belt over drum, in the back, put belt around pulley and hand trun the drum. on-line instructions had pictures to ensure proper install. It was easy.
Was this helpful?
Thank you for voting!
Broken drive belt
0 of 1 people
found this instruction helpful.
-
Gregory Modelle from Somers Point, NJ
- Easy
- 15 - 30 mins
-
Nutdriver
open the front of the dryer, open the back access panel, remove the old belt fragment, pull front cover away from bushing surface at the front of drum, drape new belt around the face of drum, match location visible as the track of old belt, reroute belt at the motor and install tensioner in the proper way, reattach front cover, install ba
... Read more
ck panel, done.
Read less
Was this helpful?
Thank you for voting!
There were multiple holes in the lint filter screen.
0 of 1 people
found this instruction helpful.
-
Kenneth from Kennesaw, GA
- Really Easy
- Less than 15 mins
There were no tools required. I simply pulled out the old filter, compared it to the new filter, for size and shape. Then simply placed the new lint filter in place of the old one.
Was this helpful?
Thank you for voting!
Old lint filter was cracked/damaged
0 of 1 people
found this instruction helpful.
-
Stephen from Port Orchard, WA
- Really Easy
- Less than 15 mins
Just put it in place. The hardest part was to choose the model number closest to the one I have (since it wasn't listed). PartSelect.com showed a list of similar models and I was able to choose from that. Luckily I got the right one (wrong color, but it fit!).
Was this helpful?
Thank you for voting!
The screen had holes in it and was leaking lint into exhaust pipe.
0 of 1 people
found this instruction helpful.
-
John from Palmerton, PA
- Really Easy
- Less than 15 mins
Just removed old tray and installed new tray.
I was completely surprised that in less than 24 hours the new part was at my door!
This is the kind of service every company should strive to supply to the customer,and the delivery fee was regular 3-5 day delivery.
A job well done !!!!
I was completely surprised that in less than 24 hours the new part was at my door!
This is the kind of service every company should strive to supply to the customer,and the delivery fee was regular 3-5 day delivery.
A job well done !!!!
Was this helpful?
Thank you for voting!
The old lint filter had a tear in it...decided to replace it.
0 of 1 people
found this instruction helpful.
-
Gary from Aurora, OH
- Really Easy
- Less than 15 mins
1. Open dryer door.
2. Remove old lint filter.
3. Put new filter in it's place.
2. Remove old lint filter.
3. Put new filter in it's place.
Was this helpful?
Thank you for voting!
Dryer wouldn't tumble
0 of 1 people
found this instruction helpful.
-
Diana from Kalkaska, MI
- Easy
- 30 - 60 mins
-
Screw drivers, Wrench (Adjustable)
Actually, my boyfriend did the repair by taking off the top and back of the dryer to access the drum and belt he replaced the belt and put the dryer back together
We are greatful for your service and really happy we didn't have to drive all over to find the part.
We are greatful for your service and really happy we didn't have to drive all over to find the part.
Was this helpful?
Thank you for voting!
dryer was making thumping noise (like when a pair of sneaker is being dried)
0 of 1 people
found this instruction helpful.
-
Alan from Waterloo, IL
- A Bit Difficult
- 30 - 60 mins
-
Screw drivers, Socket set
Started with removal of rear inspection plate on rear of drier,rotated drier drum by hand to look for any visible problems. Found that drive belt with age had lost sections of teeth and every time the bad sections would go past motor they would "thump".
1. Removed belt from tensioner. Done simply by moving tensioner to unload belt. ... Read more r />2. Slipped belt off motor drive and moved belt to front of drum.
3. Opened drier door and removed 4 screws from under the lid or top of drier ,raised lid for access to belt once belt had been slid to front of drum.
4. (steps 4 and 5 are the hardest parts)Worked drive belt between drum and felt insulators keep in mind there are many stamped steel pieces and sharp edges can be present.
5. Removed belt by feeding a small section past felt and drum and worked rest out from frt. top of drier.
6. Installed new belt in reverse order as removal.
This was done without aid of instruction manual and by someone having major back surgery 4 months earlier. No idea how much this saved me but the price of the belt and time and effort involved made it woth my while I'm sure.
1. Removed belt from tensioner. Done simply by moving tensioner to unload belt. ... Read more r />2. Slipped belt off motor drive and moved belt to front of drum.
3. Opened drier door and removed 4 screws from under the lid or top of drier ,raised lid for access to belt once belt had been slid to front of drum.
4. (steps 4 and 5 are the hardest parts)Worked drive belt between drum and felt insulators keep in mind there are many stamped steel pieces and sharp edges can be present.
5. Removed belt by feeding a small section past felt and drum and worked rest out from frt. top of drier.
6. Installed new belt in reverse order as removal.
This was done without aid of instruction manual and by someone having major back surgery 4 months earlier. No idea how much this saved me but the price of the belt and time and effort involved made it woth my while I'm sure.
Read less
Was this helpful?
Thank you for voting!
clogged lint filter with rust
0 of 1 people
found this instruction helpful.
-
David from Burlington, VT
- A Bit Difficult
- 30 - 60 mins
The part received had about 6" of the screen not bonded to the frame. I used clear epoxy and a 1/8" dia. dowel wrapped in saran wrap. after applying the epoxy to the screen/frame interface, the wrapped dowel was clamped to the frame. After the epoxy cured I removed the fixture and peeled off the saran wrap. The fix was a complete success
... Read more
and was undetectable. Your support rep. was excellent and I will use your company anytime that I need parts. Thank you. Dave Hathaway.
Read less
Was this helpful?
Thank you for voting!
Broken drive belt
0 of 1 people
found this instruction helpful.
-
MALCOLM from SUMMERVILLE, SC
- A Bit Difficult
- 1- 2 hours
-
Nutdriver, Screw drivers
Removed the top, front and lower rear section of the dryer. This being my first experience replacing a dryer belt I naturally missed the tensioner pulley first try, then installed the belt on the wrong side of the pulley and found I didn't have enough tension. After some thought and a long hard look I realized my mistake and the third tim
... Read more
e was the charm. Next time I need to replace a dryer belt it should be a snap and go a lot faster.
Read less
Was this helpful?
Thank you for voting!
Broken drive belt
0 of 1 people
found this instruction helpful.
-
JOSEPH from BERGENFIELD, NJ
- Difficult
- More than 2 hours
-
Screw drivers, Wrench (Adjustable)
Unplugged machine and turned off the gas. Removed top panel,4 screws along inside top edge of door opening. Used a wooden shim to pry the drum away from the surrounding "lip with felt padding. Slipped belt through.the trick is getting the belto around the entire drum. First I got it over the top of the drum, and fed it around the bottom
... Read more
by turning the drum and pushing the belt through the opening made by the shim between the bottom of drum and the lip with felt. It was kind of like feeding a bicycle chain onto a sprocket as you turn the wheel..
Removed back panel and vent hose, removed old belt laying on floor of machine, fed the belt onto the motor pulley and the tension pulley. Tension pulley presses on top side of belt. Belt should be in same position on drum as old belt, you can see a friction mark all around the drum from the old belt.
Replaced panels and vent hose. Put felt padding back into place wherever it slipped out. Very important because if you don't it scrapes the drum when turned on and makes a loud sound.
Dryer works perfectly again.
Removed back panel and vent hose, removed old belt laying on floor of machine, fed the belt onto the motor pulley and the tension pulley. Tension pulley presses on top side of belt. Belt should be in same position on drum as old belt, you can see a friction mark all around the drum from the old belt.
Replaced panels and vent hose. Put felt padding back into place wherever it slipped out. Very important because if you don't it scrapes the drum when turned on and makes a loud sound.
Dryer works perfectly again.
Read less
Was this helpful?
Thank you for voting!
The belt that turn dryer drum ; broke
0 of 2 people
found this instruction helpful.
-
james from dayton, OH
- A Bit Difficult
- 1- 2 hours
-
Nutdriver, Screw drivers
unplugged dryer,removed air duct,,remove( top of dryer) by removing the two back screws.... removed two screws under (fornt top lid),laid top to the side. ...Now remove ( front of dryer) remove,two screws near the( top on the inside)...lean dryer back, and remove outsidescrews at the bottom)..the front should come off. ..located small
... Read more
square opening in the back of the dryer release clamp from drum ,...put belt around drum... put drum and dryer back together...(relace any electrical wires removed if any..remove (rear bottom plug panel)..you can now see the lower inside of dryer....make sure belt is level on drum by rotating...place belt on lower pully,... lift tension(spring pully) on to belt.. replace cover..
Read less
Was this helpful?
Thank you for voting!