EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

DBSR453EB2WW General Electric Dryer - Parts

1 - 12 of 90

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
DRYER FRONT BEARING WHITE 2PK – Part Number: WE03X37318
$17.15
In Stock
DRYER FRONT BEARING WHITE 2PK
★★★★★
★★★★★
(166)
Part #WE03X37318
This authentic, white Drum Bearing Slide, also known as the bearing drum slide, glide, or pad, is a plastic, easy-to-install part for your dryer. It replaces the dryer's front drum slide to allow for easier movement. You'll know if this part is an issue if your dryer is unable to tumble properly or is very noisy. Damage can come from regular use. The part attaches to the outermost side of the bearing. Check both slides for signs of wear, because they often wear at the same rate, and should be replaced at the same time; there are 2 of these particular slides per dryer. This part is sold individually, so you'll need to purchase multiple parts if replacing both at the same time.
Timer Knob – Part Number: WE1M654
$43.18
In Stock
Timer Knob
★★★★★
★★★★★
(112)
Part #WE1M654
This timer knob is used to set the dryer cycle by advancing the timer. The plastic can become brittle with age and crack where it attaches to the timer shaft. You will need to replace this part if it slips off the shaft and cannot advance the timer. If it constantly falls off and will not stay on the shaft by itself, it may be cracked or broken and need to be replaced. This model is roughly 3 inches in diameter and made of white plastic. Sold individually.
Rotary Start Switch – Part Number: WE4M519
$27.36
In Stock
Rotary Start Switch
★★★★★
★★★★★
(63)
Part #WE4M519
This replacement start switch is a genuine OEM part for your dryer. If your dryer will not start or shut off, you may need to replace this part. For this repair you will need a number 2 Phillips screwdriver and a pair of needle nose pliers. Disconnect power to the dryer before beginning this repair.
Light Bulb – Part Number: WE05X20431
$24.75
In Stock
Light Bulb
★★★★★
★★★★★
(28)
Part #WE05X20431
This light bulb, also known as a drum lamp, illuminates and lights up the dryer drum when the door is open. If the light bulb in the dryer is burnt out or lighting is inconsistent, replacing it can solve this problem. No tools are required for this replacement. To repair, first locate the top section in the interior of the dryer and check the bulb. Next, unscrew the bulb by making three to four turns. Pro tip: the bulb cannot be screwed straight in, instead lean it at a 45-degree angle. Refer to the diagram provided by the manufacturer for further instruction and guidance. Remember to unplug the dryer from the power source for your safety.
Door Handle - White – Part Number: WE01X20419
$34.98
In Stock
Door Handle - White
★★★★★
★★★★★
(68)
Part #WE01X20419
This part is on the outer door of the dryer.
Knob and Clip – Part Number: WH01X10060
$30.53
In Stock
Knob and Clip
★★★★★
★★★★★
(29)
Part #WH01X10060
This knob accepts a D-shaped shaft.
Dryer Lint Chute Assembly – Part Number: WE14X25080
$82.97
In Stock
Dryer Lint Chute Assembly
★★★★★
★★★★★
(18)
Part #WE14X25080
This lint chute assembly is a genuine replacement component designed for GE and Hotpoint dryers. It plays a critical role in directing exhaust airflow from the dryer drum to the blower wheel, ensuring efficient drying performance. The assembly houses the lint filter and helps maintain proper airflow, which is essential for preventing overheating and reducing drying times. A damaged or clogged lint chute can restrict airflow, leading to performance issues and potential safety hazards such as lint buildup. As an OEM part, it offers a precise fit and reliable operation within compatible dryer models. Sold individually.
Drum Bearing Sleeve – Part Number: WE1M462
$36.95
In Stock
Drum Bearing Sleeve
★★★★★
★★★★★
(8)
Part #WE1M462
This rear drum bearing sleeve is a critical support component located at the back of the dryer drum, designed to reduce friction and ensure smooth rotation during operation. As the drum spins, the sleeve helps maintain alignment and stability, contributing to efficient drying and quiet performance. A worn or damaged sleeve can lead to symptoms such as squeaking, grinding noises, excessive drum movement, or heat loss. This genuine OEM replacement is compatible with select GE and Hotpoint models and restores proper drum support. Installation typically involves accessing the rear panel, removing the drum, and replacing the sleeve to restore optimal function.
Door Switch – Part Number: WE4M415
$39.46
In Stock
Door Switch
★★★★★
★★★★★
(8)
Part #WE4M415
A door switch is a simple on/off mechanism that prohibits the dryer from operating when the door is open.
Retainer O-Ring – Part Number: WE1M461
$17.28
In Stock
Retainer O-Ring
★★★★★
★★★★★
(1)
Part #WE1M461
This authentic OEM rear bearing O-ring is designed for use with GE dryers. It helps secure the drum rear bearing onto the drum shaft, playing a key role in maintaining smooth and quiet dryer operation. A common sign that this part may need replacement is increased noise during the drying cycle. This O-ring is sold individually. To replace the O-ring, you’ll need a Phillips screwdriver, a square-head screwdriver, a small flat-blade screwdriver, and needle-nose pliers. Always consult your dryer’s manual or parts diagram to ensure proper installation and compatibility.
Heating Element and Housing – Part Number: WE11M23
$142.49
In Stock
Heating Element and Housing
★★★★★
★★★★★
(10)
Part #WE11M23
Note: The insulators on the housing are NOT sold separately.
High Limit Thermostat - L315-65 – Part Number: WE4M137
$79.15
In Stock
High Limit Thermostat - L315-65
★★★★★
★★★★★
(6)
Part #WE4M137
This part is the replacement high-limit thermostat or safety thermostat for your dryer. The high-limit thermostat is found on the upper right-hand side of the heater housing, and it cuts off power to the dryer motor if the temperature reaches an unsafe level. If you push the start button and nothing happens, the high-limit thermostat should be tested for continuity and replaced if the contacts are open. Be sure to disconnect power to the dryer before you begin this repair. This part is sold individually and is an OEM part.
1 - 12 of 90