My Orders
- Home
- CWE5800ACE28
- Instructions
CWE5800ACE28 Maytag Wall Oven - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
bake element burned through.
-
Ronnie from Albuquerque, NM
- Really Easy
- Less than 15 mins
-
Screw drivers
Very simple. Removed two screws-pulled element out about 3-4 inches-pulled off the contacts-reversed procedure using the provided screws, turned the breaker switch on and everything worked fine. Excellent service from parts select and quick shipping.
Was this helpful?
Thank you for voting!
Insulation along the top of the oven cracked and broke off
-
Carol from Park Ridge, IL
- Really Easy
- Less than 15 mins
Took old insulation off and replaced it with new by hooking new part in its place.
Was this helpful?
Thank you for voting!
Erratic oven temperature, would not hold a setting or would get to that setting and then loose it shortly afterward.
-
Lance from Northfield, IL
- Really Easy
- Less than 15 mins
-
Screw drivers
Removed two screws on sensor in the oven. Pulled out stove and after unplugging same removed the back panel. Sensor has an electric connection on the rear of the oven with a connection that is easily separated. Threaded new sensor electrical connection through inside of oven and connected on the back of stove. Pushed insulation back aroun
... Read more
d the wire were in goes through to the oven. Replaced back on stove and screwed in two screws which hold sensor inside the oven. Replaced back cover on stove, plugged it in and pushed it back in place. Did the trick for me..
Read less
Was this helpful?
Thank you for voting!