EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

CW20P8ASC Crosley Washer - Instructions

All Instructions for the CW20P8ASC
31 - 45 of 289

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
terrible grinding noise
9 of 10 people found this instruction helpful.
  • ALVA K from chippewa falls, WI
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Pliers, Screw drivers
For safety I Unplugged the machine
Tipped machine back and removed the belt. Rotated the motor by hand and all is well there. Rotated the water pump by hand and a grinding sound appeared. I Let the machine down . Using a hard object , 1/16th of an inch thick, I slide it between the front edge of the lid and the front panel unlocking the clips ( one on the right side and one on the left side ) holding the lid down. I then tipped the lid up and removed the 2 screws holding the front panel on. Lifted the front panel off of the clips on the bottom end of panel. Using a nut driver I removed the 3 bolts holding the pump to the frame. Then with a pliers I removed the clips holding the 2 hoses. With a pan to catch the water I removed the hoses and drained them into the pan.
I then took my machine model number and went to the internet in search of a new water pump. After checking several sites with no success, I come upon the site for PartSelect.Com. With the excellent search method on the site I was able to quickly find the part I needed. I placed my order (10pm) on a Tuesday night and a short time later I received an email letting me know they had my order. On Wednesday I received an email letting me know they had shipped my order. On Friday the order had arrived.
I removed the new pump from the box and inspected it . Every thing looks great. I placed the pump into its mount on machine and bolted it down. Attached the 2 hoses, put the front panel back on and tipped the top down into place. Pushed machine into place, plugged it in and fired it up. I now have a quiet running machine again. Thank You to PartSelect.com for the quick response to my
Was this helpful?
Thank you for voting!
Washer made a loud noise during spin-eventually stopped spinning
8 of 8 people found this instruction helpful.
  • Christopher from Haverhill, MA
  • Very Difficult
  • More than 2 hours
  • Socket set
I was able to get the belt off easily but the belt was fine. I changed the snubber easily also. But that wasn't the problem. I went through all the parts that are easy enough to change without a mechanic but turned out it was something inside the innerbasket and we had to junk the washer and it was only 4 yrs old.
Was this helpful?
Thank you for voting!
Loud squeal when spin cycle finished, white powder under washer
8 of 8 people found this instruction helpful.
  • Kevin from Pooler, GA
  • A Bit Difficult
  • 1- 2 hours
  • Nutdriver, Pliers, Wrench set
Read DIY review from William, Middleton, OH on 01-15-08. Tip on how to relieve spring pressure on brake assembly worked like a dream (3ea 10-24X2 bolts/machine screws). Replaced brake and machine works like new and was an inexpensive fix. Once the shell/housing is off the machine, tub can be turned upside down and the base doesn't need t o be removed. White powder under machine was a plastic wear ring that tells you when your brake rotor needs to be changed. Brake rotor still had lining but was much thinner than replacement part. Note* Use putty knife to push in clips on front to release the top lid section.
Was this helpful?
Thank you for voting!
washer was squeeling to a stop
7 of 9 people found this instruction helpful.
  • paul from newbern, TN
  • A Bit Difficult
  • 1- 2 hours
  • Nutdriver, Screw drivers, Socket set
first remove drive belt then then remove dust cover on bottom of shaft take 5/16 nut driver to only 4 of the screws off that hold the brake cover on install 4 5/16 screws 1" long in those 4 spots.reomve rest of screws then slowly reomve back out 1" screws to relve spring pressure from brake pad.install all new parts from partsselect.com then install other part taken off in oreder and make your wife very happy
Was this helpful?
Thank you for voting!
Leaky hose resulted in damaged Thrust Bearing
8 of 12 people found this instruction helpful.
  • Steven from Gilbert, AZ
  • A Bit Difficult
  • 1- 2 hours
  • Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable)
After replacing the tub to pump hose, I adjusted the feet on the washer. Apparently, the main pulley sits so low on these washers that it ground into the floor and stripped out the thrust bearing. I ordered the new thrust bearing clip and put it in the evening I received it. The instructions it came with were very helpful and it was si mple to reassemble. Up until the last piece - the retaining clip. The majority of the repair time was spent replacing that clip. If there is a tool that makes the job easier, I didn't have it. I finally got it on with two flathead screwdrivers prying the shaft out while I wedged one corner of the clip in the groove.
Was this helpful?
Thank you for voting!
Oil leak from lower lip seal
6 of 6 people found this instruction helpful.
  • Anthony from CHESANING, MI
  • Easy
  • 1- 2 hours
  • Nutdriver, Screw drivers, Socket set, Wrench set
I didn’t have special tool for brake but punch and hammer worked. Seal was easy to replace. Several videos online to show you how. It wasn’t worth it to tear apart the transmission and buy more parts/seals (if they were even available). But I didn’t know how much oil was in it. I drilled a hole in the side to somewhat check level and added 80-90 gear oil. It was almost empty and added almost a quart. Used a self taping screw/bolt with gasket sealer to plug the hole. I got 34 yrs out of this washer. If it fails, oh well. Just hate to buy a new one that only last 10yrs if im lucky.
Was this helpful?
Thank you for voting!
Washer went off balance and the flume broke off
13 of 27 people found this instruction helpful.
  • Michelle from Jupiter, FL
  • Really Easy
  • Less than 15 mins
  • Screw drivers
I removed the part that was still attached to the washer and installed the new flume. It took less than five minutes and a repair that would have cost over $85 cost less than $10 and I am no plumber!
Was this helpful?
Thank you for voting!
new belt worn out by a bad motor pulley
7 of 9 people found this instruction helpful.
  • ALBERT from WASCO, CA
  • Really Easy
  • Less than 15 mins
  • Pliers
i took off the old belt and i took off the motor pulley with the pliers and srewdriver. i put the new pulley in with my hand and gave it a hit with the palm until it snap in and then i put the belt on by rotating the main pulley on tub till the belt was pulley on.
Was this helpful?
Thank you for voting!
Noticed nick in drive belt durng inspection and cleaning
5 of 5 people found this instruction helpful.
  • Brian from Plainville, CT
  • Really Easy
  • Less than 15 mins
Washer was making noise especially when spinning. I took the washer apart to clean it, That is what it really needed. Also adjusted the water level to prevent overflows which caused soap and water to get underneath into the drive belt area as well. During inspection noticed a nick in the drive belt, Although this was not really causin g immediate problem wanted to repalce it to prevent problems. Ordered the belt; it came in two days with no special postage. To install, just leaned the washer over on its front on a slight incline. Took old belt off and put new on by turning the big pulley. It is spring tensioned, so no tools. This may be the easiest part repacement I ever did. Took longer to write this paragraph than to repalce the belt.
Was this helpful?
Thank you for voting!
I had water leaking from the top of the tub.
6 of 8 people found this instruction helpful.
  • Lester from Elk Grove, CA
  • Really Easy
  • 15 - 30 mins
I opened up the top of the washer which exposed the tub, I took the top ring off the tub and under in side of the ring is the seal. Took the old one out and put the new one in. The old seal was completely wore out.
It was real easy.
Finding the part is usually the hardest part, but thanks to Parts Select finding the part was the easiest part of the repair.
Was this helpful?
Thank you for voting!
washer overflowing
7 of 12 people found this instruction helpful.
  • Aaron from Lawton, OK
  • Really Easy
  • Less than 15 mins
  • Nutdriver, Screw drivers
Once the washer was unplugged, i removed the two screws on the back pannel, disconnected the three wires, rubber water line, and two screws holding it to the control panel. Quite simply reversed the process with the replacement part i ordered, which arrived overnight, and the problem was solved.
Was this helpful?
Thank you for voting!
Water pump failure
5 of 6 people found this instruction helpful.
  • John from Alhambra, CA
  • Easy
  • Less than 15 mins
  • Nutdriver, Pliers
Disconnect electricity....remove front panel by gently prying up lid.... Remove two small screws at corners of front panel. You may need small nutdriver here or very small hands, you can easily swivel tub out of the way....once front panel is off water pump is at the bottom right... It is only connected by two squeeze clamps and 3 nuts... This is obviously where the adjustable wrench and nutdriver come in very handy... Otherwise this job will be a bit longer....be prepared for residual water to pour out...you will need towels or a bucket....replace old with new one by reversing the process...at this point tilt the entire washer on it's backside or at least at a 45 degree angle to access the bottom... Swivel the motor away to slack up the belt...remove belt and replace in reverse order of diassembling.... Should take no more than 15 minutes.... Good luck!!!!!
Was this helpful?
Thank you for voting!
broken pump, burned belt
5 of 6 people found this instruction helpful.
  • Jeffery from Omega, GA
  • Easy
  • 15 - 30 mins
  • Nutdriver, Socket set, Wrench set
I removed four screws to remove a plate to get access to the pump. Then I removed 3 screws to remove the pump. I then put the new pump in place and put the 3 screws back in the pump. Then I put the plate back on and put the 4 screws back in. Then I put the belt on and put the washing machine back in place and connected the water line s and drain line and plugged the washing machine back in and then tested the washing machine to make sure it worked. Job completed.
Was this helpful?
Thank you for voting!
Hoes had a leak in it
5 of 6 people found this instruction helpful.
  • Richard from moyock, NC
  • Really Easy
  • Less than 15 mins
  • Pliers, Screw drivers
The Repair went well . I had the hose on in about 30 seconds . The best part about this ordeal was the ease of finding the part on your website , and the speed of the delivery . I had my part in about 2 days , put it on and back to the fun part of clothes washing . I would recomend this company to everyone. Thanks, Rick K.
Was this helpful?
Thank you for voting!
Washer was making noise during spin cycle
4 of 4 people found this instruction helpful.
  • William from MORGANVILLE, NJ
  • Really Easy
  • 15 - 30 mins
  • Pliers, Screw drivers, Socket set
Hardest part was finding part that needed the needed repair. Searching the web for issues associated with the sound resulted in many links. Once the sound was found, I went to the video to see how to remove the Water Pump so I could examine it to confirm that was the correct piece. It took about 15 minutes to remove the part. Since I h ad to remove the belt to get it out, I realize that the belt needed replacement as well. So both parts were ordered. Replacing the parts also took about 15 minutes. Relatively easy repair. Be aware that the video on the part select video shows the water pump in a different location than the Maytag washer. To get to the Maytaq water pump, there is a panel in the back that had to be opened to access the water pump.
Was this helpful?
Thank you for voting!
All Instructions for the CW20P8ASC
31 - 45 of 289