EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

CW20P8AC Crosley Washer - Instructions

All Instructions for the CW20P8AC
121 - 135 of 264

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Washer making loud noise when water pump operating, still worked but made very loud noise
0 of 1 people found this instruction helpful.
  • Buddy from Ogden, UT
  • Easy
  • 15 - 30 mins
  • Nutdriver, Pliers, Screw drivers
I ordered the replacement pump assembly (water pump)for my Atlantis model maytag washer, removed the old one, installed the new one and works like a charm. The only difficulty I had was trying to figure out how to remove the cover on the front of the washer, to remove the clips, it slid side to side instead of popping out, found the inst ructions on-line, NO instructions came with the pump but if you have any common sense when it comes to repairs it was easy to remove and install the new part.
Was this helpful?
Thank you for voting!
noisy pump
0 of 1 people found this instruction helpful.
  • Tery from Orange, CA
  • Easy
  • 15 - 30 mins
  • Nutdriver, Pliers, Screw drivers
Removed back plate, tilted up washer removed pump removed belt. Then replace pump and then replaced belt
Was this helpful?
Thank you for voting!
drive belt broke
0 of 1 people found this instruction helpful.
  • Gerard from Keansburg, NJ
  • Really Easy
  • Less than 15 mins
pulled out the washing machine that was the hard part, tilted it back checked too make sure everything spun by hand just to see if that was reason for the belt to snap but everything spun by hand nice and smoothly poped on the drive belt and everything works fine back in business.
Was this helpful?
Thank you for voting!
Under belt was used and ready to let go..
0 of 1 people found this instruction helpful.
  • Melanie from Tamarac, FL
  • Really Easy
  • Less than 15 mins
First I am a woman and was able to do it, and if I can do it anyone should be able to do this. The service call alone was 75.00, and the belt was 23.00 with shipping. First we tilted the washer at a 45 degree angle and I removed the belt, and just rolled the newer one on the track. That was it and I was done. My washer now purrs like a ki tten love it. And Part Select sent out my part and I recieved it next day, thank you for wonderful service that kind of service is hard to find. <3
Was this helpful?
Thank you for voting!
Water would not drain and tub would not spin.
0 of 1 people found this instruction helpful.
  • Larry from Waukesha, WI
  • Easy
  • 30 - 60 mins
  • Nutdriver, Screw drivers, Socket set
I had to raise the top of the washer and take off the front pannel. It was not too hard to replace the pump except that it was in the back corner and it was hard to reach the bolts to remove and install the new pump.
Was this helpful?
Thank you for voting!
washer shaking
0 of 1 people found this instruction helpful.
  • Jerry from Troy, PA
  • Really Easy
  • 30 - 60 mins
  • Nutdriver, Socket set
took drum out replase snubber put drum back in
Was this helpful?
Thank you for voting!
Vibration
0 of 1 people found this instruction helpful.
  • Richard from Jacksonville, FL
  • Really Easy
  • 30 - 60 mins
  • Nutdriver, Screw drivers
Troubleshoot problem, removed front, removed drive belt, removed pump with pulley. Note, new pump did not have black plate, installed worked great.Thanks
Was this helpful?
Thank you for voting!
the lower panel rotted away and damaged the pump
0 of 1 people found this instruction helpful.
  • kenneth from wayland, NY
  • Easy
  • 1- 2 hours
  • Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
this email does not include the rest of the parts i ordered. i had to replace the pump and the base panel of the washer as it was rotten. i had to open the top, remove the front panel and change out the base and install the pump. your parts and website were very helpful. thank you however this will be the last maytag i will purchase .
Was this helpful?
Thank you for voting!
Had some difficulty placing pulley back in place
0 of 1 people found this instruction helpful.
  • Oscar from Weslaco, TX
  • A Bit Difficult
  • 1- 2 hours
  • Pliers, Screw drivers, Socket set
Laid washer on its side, released five of the six tub springs, then removed the dive belt and the main pulley. With some effort removing the old snubber ring, placed the new snubber in place. After fighting with the large spring under the pulley I was able to replaced the six screws with the help of an assistant. Replaced the pulley, b elt and the five springs. Closed the unit up and placed all the hoses back in place. I was amazed at how smooth the washer functioned with no vibration at all! Thank You.
Was this helpful?
Thank you for voting!
Belt was frayed and pump was leaking.
0 of 1 people found this instruction helpful.
  • Glenn from Kansasville, WI
  • A Bit Difficult
  • 1- 2 hours
  • Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
I removed the back panel and then removed the old pump. After attaching the new pump I flipped the machine and attached the new belt. I put everything back together and voila, the machine works.
Was this helpful?
Thank you for voting!
Washer shook and danced on basement floor
0 of 1 people found this instruction helpful.
  • Bruce H from Mason City, IA
  • A Bit Difficult
  • 1- 2 hours
  • Pliers, Screw drivers, Socket set, Wrench set
I found on-line that replacing the snubber ring may fix the problem and ordered the part. With the instructions also downloaded I started taking the washer apart. Without the instructions the task would have been more difficult and possibly disastrous as I might have taken the bolts out that tighten down the snubber ring. All went well wi th a little patience. The washer works good.
Was this helpful?
Thank you for voting!
when in spin cycle it would shake rattle &roll
0 of 1 people found this instruction helpful.
  • Marvin from Manteca, CA
  • A Bit Difficult
  • 1- 2 hours
  • Nutdriver, Pliers
open top,remove back panel.then laid on the side and removed belt.remove hose from tub to pump.removed small hose for fill level.Hard part was to remove springs from tub.Then pull tub and transmission out of housing.Remove pulley from shaft.Lossen screws around snubber ring but do not remove them.Remove old snubber ring.clean surfaces wit h alcohol.install new snubber ring and assemble in reverse order.
Was this helpful?
Thank you for voting!
My washer had stopped turning. It wouldn't wash or spin but the moter was still working.
1 of 5 people found this instruction helpful.
  • Evelyn from Temple, TX
  • Really Easy
  • Less than 15 mins
We're not repair people. So when calling around for the replacement belt no one had it. Everyone said that the belt went to a dryer. We simply inspected the machine. Located the worn belt which was on the bottom of the washer machine went online and ordered the belt. Thank you so much you guys really saved me. I will always recommen d you all to everyone that I know. Your system works Great! Thanks Part Select!
Was this helpful?
Thank you for voting!
pump leaking, washer would not spin right
0 of 2 people found this instruction helpful.
  • Jim from Lincoln, DE
  • Really Easy
  • Less than 15 mins
  • Pliers, Socket set
I got the part the very next day, very easy to replace. Replaced the belt as well. Parts Select is the best. Vert straight forward repair.
Was this helpful?
Thank you for voting!
washer was going out of balance
0 of 2 people found this instruction helpful.
  • Loren from Glennallen, AK
  • Really Easy
  • 15 - 30 mins
  • Pliers, Socket set
watched youtube on how to change out the snubber ring. it was quite easy.
Was this helpful?
Thank you for voting!
All Instructions for the CW20P8AC
121 - 135 of 264