CEI30IF4LSB Electrolux Range - Parts

This genuine OEM oven probe is also known as an oven temperature sensor or range probe. This part is manufactured for a range, stove, or oven to detect the temperature within the oven cavity. The probe allows the oven to maintain the set temperature by sensing the temperature and sending the information to the ovens motherboard. You may n...Read moreeed to replace this part if oven is not heating or is heating unevenly. Be sure to disconnect power to oven before replacing, as it is an electrical part. Tools needed are 1/4 inch nut driver and needle nose pliers.

Terminal block kits are also known as terminal boards, or terminal strips, and they are found in a wide variety of household appliances. Most often in ranges, wall ovens, and dryers. This kit attaches the power cord to the inner wiring of your appliance. If the terminal block is faulty, your appliance will not get the power it needs to op...Read moreerate properly. When removing the old block pay close attention to the wire placement, this will make installing your new part much easier. If you notice any of the wires or wire terminals are corroded or damaged they will also need to be replaced.

This part is found inside your oven. This oven rack comes in the color chrome and measures 24 inches in width and 16 inches in length. This is an extremely simple repair that requires no tools. The package you will receive will contain one rack. The rack may warp or become distressed over time and will need to be replaced. The rack is wha...Read moret holds your food inside the oven and allows you to adjust your food at different heights. Make sure your oven is unplugged before doing any maintenance. You will need to open the oven door and simply slide the new rack into place.

The anti-tip bracket kit comes with one metal bracket and two installation screws, and is sourced directly from the genuine manufacturer. It prevents the freestanding oven, range, or stove from tipping when force or weight is applied to an open oven door. The bracket is secured to the floor and wall and fits over the rear leveling leg in ...Read morethe back of the appliance, in a cutout specifically designed for the anti-tip bracket. This part is very essential to the safe operation of the appliance. Failure to install the bracket properly can result in the oven tipping or falling and causing injuries.

Sold Individually. These legs should be adjusted to make your appliance level on uneven flooring.

Sold Individually.

This part is sold individually. The leveling leg is black in color and measures approximately 2 inches in length. It is made of plastic. The leveling leg is found underneath your range and may crack or wear down over time. This will need to be replaced if it has broken or gone missing. If you notice your oven is wobbling or uneven it may ...Read morebe due to the leveling leg needing to be replaced. This part can be adjusted to accommodate different heights due to uneven flooring. This is a genuine OEM part sourced directly from the manufacturer.

This broil element is found on the roof of the oven.

Introducing the Door Trim Kit, a genuine OEM part specifically designed for a perfect fit with select Frigidaire oven/range models. This modern 3-sided kit enhances the aesthetic appeal of your kitchen while also remaining functional, effortlessly framing the sides and bottom of the oven door. Should you decide to install this part, pleas...Read moree allow your oven door to cool completely before starting for safety. This black Door Trim Kit not only affirms quality but also durability, ensuring long-lasting performance for your cooking needs. It's highly recommended to thoroughly examine the compatibility of your model prior to placing your order, as this part can have minor variations in size and shape. Perfect your oven with the sleek and sturdy Frigidaire Door Trim Kit.

Introducing the Latch Motor Door lock latch motor and switch assembly by Frigidaire, an essential component for your range. It is an authentic, OEM standard part, compatible with certain models of Frigidaire, Electrolux, White Westinghouse, and Tappan brands. This quality part locks the oven door during the self-clean cycle, contributing ...Read moreto the efficiency and safety of your appliance. As safety must always be a priority, it is advised to shut off the electrical power to the range before installing this part. Moreover, consider using protective gloves during installation. Included are useful DIY instructions with a tutorial video for easy self-installation, suitable for any home repairs enthusiast.

This oven door gasket creates a secure seal around the door to keep heat inside the oven for consistent cooking and energy efficiency. Made from high-quality, heat-resistant fiberglass with a tempered wire insert, it offers superior durability compared to standard seals. The gasket measures approximately 80 to 84 inches in length and incl...Read moreudes 16 mounting clips for easy installation—simply remove the old seal and press the new one into place. Replacing a worn gasket helps prevent heat loss, uneven cooking, and extended preheating times.

The Frigidaire Oven Door Light Switch is a genuine OEM part designed specifically for some models of Frigidaire stoves, ovens, and ranges. This highly efficient switch is responsible for turning off the oven light when the oven door is closed, offering you greater energy efficiency and convenience when operating your appliances. This must...Read more-have replacement part maintains the high-quality performance of your oven and is easily installable with the provided DIY instructions. However, it's always recommended to unplug the range or shut off the house circuit breaker before installing this component. Also, remember to wear work gloves to protect your hands during installation. Be sure to verify the shape and size of the part fit your oven model before purchase.