BL02B Magic Chef Refrigerator - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Ice maker working with no production of ice
2 of 2 people
found this instruction helpful.
-
Paul from East Northport, NY
- Really Easy
- 15 - 30 mins
-
Socket set, Wrench (Adjustable)
Turn off the water source and unplug freezer. Remove copper tube and then remove valve from back of refrigerator. Disconnect plastic tube and power connection. Mark power connection plug top with a "T", this reminder helps with the new valve. Plug power and plastic tube into new valve and screw assembly back into refrigerator. Using a
... Read more
wrench, connect copper tube into valve. Restore water source and plug back in in freezer. Within a couple hours, ice production was back.
Like the other repair stories (that helped me), this job was very easy.
Like the other repair stories (that helped me), this job was very easy.
Read less
Was this helpful?
Thank you for voting!
Ice maker flaked and leaked leaving big glob of ice
2 of 2 people
found this instruction helpful.
-
chris from manvel, TX
- Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
Unplug wire harness back of fridge. Unscrewed 4 screws on guide for ice bin. then unscrewed two screws holding ice maker to wall of fridge. removed ice maker. then had to take front cover off (pull hard, it comes off) and remove wire harness plug from the ice maker. save this, front cover, and all hardware to re-use. reverse steps to r
... Read more
einstall, including wire guide that goes up and down to stop and start ice maker when bin fills. Have to put this into front part of ice maker correctly for it to work. make sure it is down so that it will produce ice. ice tray took a few hours to fill with water initially, must be on a timer or something.
Read less
Was this helpful?
Thank you for voting!
Ice tray filled up with water. Stopped making ice.
2 of 2 people
found this instruction helpful.
-
robert from COLDSPRING, TX
- Very Easy
- 15 - 30 mins
-
Screw drivers
As per instructions. Removed parts from old ice maker, and installed them on new one, Then installed it in the freezer. Works good.
Was this helpful?
Thank you for voting!
Old ice maker started leaking
2 of 2 people
found this instruction helpful.
-
Curtis from Barrington, IL
- Really Easy
- Less than 15 mins
-
Screw drivers
Took under 5 minutes. Removed two screws and unplugged the wire bundle from refrigerator. Removed old unit. Put old wire bundle on new unit. Plugged wire bundle back into refrigerator and remounted the new ice maker. Could not have been easier. Watched the video first, it was very helpful.
Was this helpful?
Thank you for voting!
Not making ice, and water leaking in freezer
2 of 2 people
found this instruction helpful.
-
Raymond from Northglenn, CO
- Really Easy
- Less than 15 mins
-
Screw drivers
Unplugged the power, removed old icemaker by removing 3 screws and unplugging a small wire harness
Then i moved the wire harness off the old one to the new one, moved the end cover over to new one and plugged the harness back in and screwed it back in and turned it on
ALL FIXED!
Then i moved the wire harness off the old one to the new one, moved the end cover over to new one and plugged the harness back in and screwed it back in and turned it on
ALL FIXED!
Was this helpful?
Thank you for voting!
lights did not work
2 of 2 people
found this instruction helpful.
-
Daniel from rochester hils, MI
- Really Easy
- Less than 15 mins
-
Nutdriver, Screw drivers
pulled out old socket and replaced supposed to be a duel socket but no longer exists
Was this helpful?
Thank you for voting!
water leak and frezes ice in bin
2 of 2 people
found this instruction helpful.
-
Peter from Lancaster, PA
- Really Easy
- Less than 15 mins
-
Nutdriver
to easy to describe, remove 3 screws and a wire plug then install new unite.
Works great
Thanks
Works great
Thanks
Was this helpful?
Thank you for voting!
Door light switch disintegrated
2 of 2 people
found this instruction helpful.
-
Thomas from Roseville, CA
- Really Easy
- Less than 15 mins
-
Screw drivers
Very simple fix, remove 3 screws, two connectors to the old switch
Was this helpful?
Thank you for voting!
Replacing the bulb in the freezer side
5 of 11 people
found this instruction helpful.
-
Yafa (and David) from Bothell, WA
- Easy
- Less than 15 mins
-
Nutdriver
Removed the ice brucket,
Removed the light shield by releasing one screw using a nutdriver.
Replacing the bulb and reinstalled the light shield.
Your web site is one of the best and most helpfull service sites I ever used. Just wish that in the future you will ship parts overseas.
Removed the light shield by releasing one screw using a nutdriver.
Replacing the bulb and reinstalled the light shield.
Your web site is one of the best and most helpfull service sites I ever used. Just wish that in the future you will ship parts overseas.
Was this helpful?
Thank you for voting!
fridge door switch did not work
2 of 2 people
found this instruction helpful.
-
stu from richmond, VA
- Easy
- Less than 15 mins
-
Socket set
I removed the switch housing (4 screws), replacing the switch in the housing was a snap. It took 5 minutes, cost $8 and light works like new!
Why didn't I order this part and do the repair earlier? Very simple.
Why didn't I order this part and do the repair earlier? Very simple.
Was this helpful?
Thank you for voting!
water overflow,coating on tray peeling off
2 of 2 people
found this instruction helpful.
-
Jeffery from vero beach, FL
- Really Easy
- Less than 15 mins
-
Nutdriver, Screw drivers
remove 3 screws,rotate assembly,depress lock on wire harnass connector,un plug harnass.remove old assembly,remove and transfer side cover and steel wire at front of assembly,connect harnass to new assembly,rotate into place,aling screw holes and install 3 screws.flip front steel wire down and wait for about 1 hour,first tray of ice will
... Read more
fall..all done.
Read less
Was this helpful?
Thank you for voting!
Light didnt go on
3 of 5 people
found this instruction helpful.
-
dorotea from staten island, NY
- Really Easy
- Less than 15 mins
-
Screw drivers
The light rocker switch wasnt working. I found the part on the web site. It was so easy. I used a screw driver to pop out the old one and pop the new one in. It took 5 min. Thanks!!!
Was this helpful?
Thank you for voting!
Ice from icemaker taste metallic; new ice maker directly from box
2 of 3 people
found this instruction helpful.
-
Samuel from ALEXANDRIA, VA
- Difficult
- More than 2 hours
I did not do the repair yet, there is no schematic on how to route the hose; also no description of how to do the routing/connections.
Was this helpful?
Thank you for voting!
Broke light switch while cleaning
2 of 3 people
found this instruction helpful.
-
Gail from Golden, CO
- Really Easy
- Less than 15 mins
use kitchen knife to pry out. replaced switch assemble and pressed back into place. Could not have done this with out help from previous customers. Thanks
Was this helpful?
Thank you for voting!
icemaker quit working
2 of 3 people
found this instruction helpful.
-
craig from green bay, WI
- Really Easy
- Less than 15 mins
-
Nutdriver
I took out 1 screw , unplugged the icemaker and lifted it out and installed the new one and had ice in no time at all. can't get much easier.
Was this helpful?
Thank you for voting!