B26FT70SNS (01) Bosch Refrigerator - Parts

This genuine Bosch water filter is used to help reduce contaminants in the water supply including chlorine and lead. The water filter measures approximately 2 inches in diameter and is 9 inches long. It is recommended by the manufacturer to replace the water filter every 6 months for best performance.

This is the replacement door bin or door tray for your refrigerator. It is made of white and clear plastic and is approximately 15 inches wide, 5 inches tall, and 8 inches deep. The door bin attaches to the refrigerator door and is used to store food. The main reason to replace the door bin is if the current bin is broken or missing. To c...Read moreomplete this repair, simply snap the old bin out of the door, and replace it with the new bin. This part is sold individually and is an OEM part.

This sensor monitors critical environmental or internal conditions'such as temperature, moisture, or system activity'to ensure accurate and safe appliance operation. When the original sensor fails, the appliance may exhibit incorrect readings or irregular performance. This replacement restores precise monitoring, stable functionality, and improved system efficiency.

This is a plastic flap with a spring and hinge designed for use within freezers and ice compartments in refrigerators and is a genuine OEM part. This flap controls the amount of ice that is dispensed from the ice compartment and is attached with a wire to the control board. You may need to replace this flap due to sanitation issues or mec...Read morehanical issues where the flap is stuck or damaged. This flap is sold as an individual part and will only require a flathead and Phillips-head screwdriver to replace. To replace it, disconnect the appliance from the wall outlet and access the ice compartment and use your Phillips-head screwdriver to remove the electronic control board. After the control board is removed, use your flathead screwdriver to disconnect and remove the old flap before replacing it with the new one and connecting that one with the control board, before reassembling the entire compartment.

This ice maker assembly is responsible for producing and dispensing ice in refrigerators. It is supplied by the original manufacturer and is located within the freezer compartment. The assembly includes the ice maker unit, ice mold, water inlet valve, shut off lever, and wire connectors. The ice maker assembly can fail due to several reas...Read moreons which include an electrical fault, malfunctioning motor, faulty water inlet valve, clogged ice mold, or broken lever. If your refrigerator is not producing/dispensing ice, and there are no water supply issues, or blockages in the outlet tubing or fill cup, you will likely need to replace this assembly. Remove the assembly mounting screws and disconnect the water supply line. Pull the faulty assembly out of the compartment and attach the new one. Reconnect the water supply line and reinstall the fasteners. PER FACTORY THIS NEW STYLE ICEMAKER WILL HAVE A SENSOR INSTEAD OF A BAIL ARM 04/2021KC

This fan motor is a replacement drive component designed to power airflow movement during operation. It helps regulate temperature and ventilation and is commonly replaced when airflow weakens or abnormal noise develops.