This genuine Bosch water filter is used to help reduce contaminants in the water supply including chlorine and lead. The water filter measures approximately 2 inches in diameter and is 9 inches long. It is recommended by the manufacturer to replace the water filter every 6 months for best performance.
This is the replacement door bin or door tray for your refrigerator. It is made of white and clear plastic and is approximately 15 inches wide, 5 inches tall, and 8 inches deep. The door bin attaches to the refrigerator door and is used to store food. The main reason to replace the door bin is if the current bin is broken or missing. To c...Read moreomplete this repair, simply snap the old bin out of the door, and replace it with the new bin. This part is sold individually and is an OEM part.
This sensor monitors critical environmental or internal conditions?such as temperature moisture or system activity?to ensure accurate and safe appliance operation. When the original sensor fails the appliance may exhibit incorrect readings or irregular performance. This replacement restores precise monitoring stable functionality and improved system efficiency.
This is a plastic flap with a spring and hinge designed for use within freezers and ice compartments in refrigerators and is a genuine OEM part. This flap controls the amount of ice that is dispensed from the ice compartment and is attached with a wire to the control board. You may need to replace this flap due to sanitation issues or mec...Read morehanical issues where the flap is stuck or damaged. This flap is sold as an individual part and will only require a flathead and Phillips-head screwdriver to replace. To replace it, disconnect the appliance from the wall outlet and access the ice compartment and use your Phillips-head screwdriver to remove the electronic control board. After the control board is removed, use your flathead screwdriver to disconnect and remove the old flap before replacing it with the new one and connecting that one with the control board, before reassembling the entire compartment.
This ice maker assembly is responsible for producing and dispensing ice in refrigerators. It is supplied by the original manufacturer and is located within the freezer compartment. The assembly includes the ice maker unit, ice mold, water inlet valve, shut off lever, and wire connectors. The ice maker assembly can fail due to several reas...Read moreons which include an electrical fault, malfunctioning motor, faulty water inlet valve, clogged ice mold, or broken lever. If your refrigerator is not producing/dispensing ice, and there are no water supply issues, or blockages in the outlet tubing or fill cup, you will likely need to replace this assembly. Remove the assembly mounting screws and disconnect the water supply line. Pull the faulty assembly out of the compartment and attach the new one. Reconnect the water supply line and reinstall the fasteners.
PER FACTORY THIS NEW STYLE ICEMAKER WILL HAVE A SENSOR
INSTEAD OF A BAIL ARM 04/2021KC
This fan motor is a replacement drive component designed to power airflow movement during operation. It helps regulate temperature and ventilation and is commonly replaced when airflow weakens or abnormal noise develops.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Joe - For model number B26FT70SNS
October 22, 2021
Hi, there is condensation/sweating on the left door strip (#501). Fridge temp set as per manual at 39 degrees f. Started to have this issue about a month or so ago. No other issues with this Bosch fridge. Thank you
Hello Joe, Thank you for the question. This could indicate the Gasket on the door is worn and needs to be replaced. We suggest checking the gasket for wear or damage and make sure it has a proper seal all the way around the door. If the Gasket is good, the Strip may not be sealing properly and need to be replaced. We hope this helps!
The ice maker has started unexpectedly dispensing ice. The interior switch is on the "off" position which should have deactivated the ice maker, but the problem continues. It is acting like the "crushed ice" button is depressed but will unexpectedly start dispensing ice when no one is in the room. I'd be happy if the ice maker was simply deactivated. Please advise.
Hello Charles, thank you for contacting us. Please make sure that the quick ice feature is not ON. You can turn off this feature from the controls. According to our research, the issue is probably with the ice maker PCB, part number PS8728423. It manages the functions of the icemaker such as water fill and ice harvest cycles. To deactivate the ice maker, locate the on/off switch behind the ice maker and turn it off. Customer service is always available to help you place an order if you are having trouble doing so. Good luck with your repair.
Ice maker freezes and will not put out ice until frozen ice is broken free.
Hello Mike, Thank you for the question. If the temperature inside the appliance is at a normal setting and the water fill tube that fills the Ice Maker is not froze over, we suggest checking the Water Filter. If it has not been replaced within 6 months it should be replaced. It can slow the water flow and cause the water entering the ice maker to be fill slowly and freeze over before it can be dispensed. We hope this helps!
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Door bin on right door interior was cracked
14 of 17 peoplefound this instruction helpful.
Gregory from STROUDSBURG, PA
Very Easy
Less than 15 mins
Replaced with same door bin and it fit perfectly Exact part was perchased and it’s just as new.
Was this helpful?
Thank you for voting!
Water filter needed replacement
4 of 14 peoplefound this instruction helpful.
Louise from PLYMOUTH, MI
Very Easy
Less than 15 mins
I mistakenly ordered the wrong part number online and the filter was too big. I called Part Select and the gentleman knew the correct part number and sent it. I also received directions for returning the incorrect part.