EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

ATB2 Refrigerator - Parts

205 - 216 of 762

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Filter Drier Tube – Part Number: W10843121
$44.23
In Stock
Filter Drier Tube
Part #W10843121
This filter dryer is for refrigerators and filters refrigerant that travels through the sealed system of the refrigerator.
Evaporator Fan Motor – Part Number: 63001247
No Longer Available
Evaporator Fan Motor
Part #63001247
This evaporator fan motor is located in the back of the freezer, and circulates air over the refrigerator coils. These coils will convert the heat into cool air, which is then circulated.
Screw – Part Number: 61002025
No Longer Available
Screw
Part #61002025
This screw is sold individually.
Touch Up Paint - White Porcelain 2 oz – Part Number: 511873
$34.74
Special Order
Terminal Cover – Part Number: WP61002138
$11.77
Special Order
Terminal Cover
Part #WP61002138
Water Tubing Clamp – Part Number: W10833902
$10.70
In Stock
Water Tubing Clamp
★★★★★
★★★★★
(1)
Part #W10833902
This water tubing clamp keeps the 3/16-inch diameter water tubing mounted to your refrigerator. Its purpose is to prevent shifting, kinking, or loosening of the tubing, ensuring a consistent water flow for the water dispenser and ice maker. It is typically located at the back of the cabinet near the inlet valve. If the clamp securing the tubing in your refrigerator is not properly secured, it can result in leaks or complete detachment. This poses a risk of water damage to your fridge, flooring, and nearby structures if not addressed promptly. To replace the clamp, refer to your user guide for its location. Then, use a screwdriver to remove the securing screw. Please note that this clamp is sourced directly from the original equipment manufacturer and does not include any additional hardware.
Screw – Part Number: WP489427
$9.62
Special Order
Screw
Part #WP489427
Sold individually.
GROMMET – Part Number: W10852725
$9.62
In Stock
GROMMET
Part #W10852725
Ice Maker Cover – Part Number: 61005374
No Longer Available
Ice Maker Cover
Part #61005374
Zip Tie – Part Number: WPW10339879
$7.47
In Stock
Zip Tie
Part #WPW10339879
A zip tie, also known as a cable tie or a wire tie, is a fastening device that holds wires or tubing together. If a machine has wires or tubing that are easily shifted, you need to hold them tightly together using a zip tie. It is a flexible, plastic strip that has serrated teeth and a locking mechanism. If the zip tie is damaged, it should be replaced. Freely moving wires may rub against surfaces, causing them to break over time. Zip ties are single-use and may not be reused after they are removed from a machine. To release the locking mechanism, you will need to insert a small flat tool into the head of the zip tie, between the tongue and the serration, and depress the bar. You can then pull the teeth out of the mechanism to loosen the cable tie. This part is produced by the original equipment manufacturer and is sold individually.
CAP- HANDL – Part Number: 61005395
No Longer Available
CAP- HANDL
Part #61005395
205 - 216 of 762