ASH18 Air Conditioner - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Motor Assembly, DC, Stepping had quit working which caused the loover on the front of the air conditioner to remain open
6 of 10 people
found this instruction helpful.
-
DOUG from SHERIDAN, WY
- A Bit Difficult
- 1- 2 hours
-
Screw drivers
Main problem was removing the cowling from the LG head unit as I had no instructions on how to do it. I had watched the previous technicians that had worked on the unit remove it. Once the cowling is removed all that needs done is remove the 2 mounting screws and unplug the old motor, plug in the new motor and remount it with the 2 screws
... Read more
. Then the cowling has to be reinstalled.
Read less
Was this helpful?
Thank you for voting!
compressor running - no running fan
3 of 7 people
found this instruction helpful.
-
william c from bay city, TX
- Easy
- Less than 15 mins
-
Screw drivers, Wrench (Adjustable)
Thia ia a common problem with all window units.
1) The fan runs but no cold air is coming out.
This indicates the compressor is not running.
2) The compressor is running and no air is coming out.
The fan motor is not running.
Both fan and compressor operate off the start-run capacitor, common to all window uunits ... Read more .
This is located in the electrical control area of the air conditioner. note unplug the unit bdfore trying to locate this part. easily located, unplug the wires noting the color coded wires on which terminals, note make a diagram so you don't forget what wire goes on which terminal. Order and replace. If the unit is over 5 years old and you are able to afford to do so, I would replace the unit for a more efficent newer unit.
1) The fan runs but no cold air is coming out.
This indicates the compressor is not running.
2) The compressor is running and no air is coming out.
The fan motor is not running.
Both fan and compressor operate off the start-run capacitor, common to all window uunits ... Read more .
This is located in the electrical control area of the air conditioner. note unplug the unit bdfore trying to locate this part. easily located, unplug the wires noting the color coded wires on which terminals, note make a diagram so you don't forget what wire goes on which terminal. Order and replace. If the unit is over 5 years old and you are able to afford to do so, I would replace the unit for a more efficent newer unit.
Read less
Was this helpful?
Thank you for voting!
fan blade in our air conditioner broke
6 of 17 people
found this instruction helpful.
-
cynthia from Riverside, CA
- Easy
- 30 - 60 mins
first my son removed the old blade then he replaced it with the new blade, and, we were back in business.
Was this helpful?
Thank you for voting!
Capacitor went out
2 of 6 people
found this instruction helpful.
-
Al from CROSS PLAINS, TX
- Really Easy
- 30 - 60 mins
-
Pliers, Screw drivers
Unplugged and replugged everything and it worked very easy job thank you
Was this helpful?
Thank you for voting!