If your air conditioner is not blowing cold air, the problem may be in the capacitor. If the capacitor fails, the compressor will not start and the fan will only blow warm air. The compressor and capacitor are located inside the cabinet and to gain access you will need to remove the cover. If the capacitor does not show any visible signs ...Read moreof damage you may require a qualified technician to test it. Make sure that the replacement capacitor has the same specifications as the original.
NOTE: Because capacitors carry a charge even when the unit is disconnected from the power, use extra caution when performing this repair.
This cross-flow fan assembly delivers even air distribution across internal components. Designed for steady airflow, it supports temperature regulation and efficient operation.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Motor Assembly, DC, Stepping had quit working which caused the loover on the front of the air conditioner to remain open
6 of 10 peoplefound this instruction helpful.
DOUG from SHERIDAN, WY
A Bit Difficult
1- 2 hours
Screw drivers
Main problem was removing the cowling from the LG head unit as I had no instructions on how to do it. I had watched the previous technicians that had worked on the unit remove it. Once the cowling is removed all that needs done is remove the 2 mounting screws and unplug the old motor, plug in the new motor and remount it with the 2 screws
... Read more. Then the cowling has to be reinstalled.
Read less
Was this helpful?
Thank you for voting!
compressor running - no running fan
3 of 7 peoplefound this instruction helpful.
william c from bay city, TX
Easy
Less than 15 mins
Screw drivers, Wrench (Adjustable)
Thia ia a common problem with all window units. 1) The fan runs but no cold air is coming out. This indicates the compressor is not running. 2) The compressor is running and no air is coming out. The fan motor is not running. Both fan and compressor operate off the start-run capacitor, common to all window uunits
... Read more. This is located in the electrical control area of the air conditioner. note unplug the unit bdfore trying to locate this part. easily located, unplug the wires noting the color coded wires on which terminals, note make a diagram so you don't forget what wire goes on which terminal. Order and replace. If the unit is over 5 years old and you are able to afford to do so, I would replace the unit for a more efficent newer unit.
Read less
Was this helpful?
Thank you for voting!
fan blade in our air conditioner broke
6 of 17 peoplefound this instruction helpful.
cynthia from Riverside, CA
Easy
30 - 60 mins
first my son removed the old blade then he replaced it with the new blade, and, we were back in business.