AS11 - Parts

This is a genuine OEM sourced replacement assembly designed for use with Eureka vacuums. This is a mechanical assembly which allows user to engage the brush roller. This assembly consists of metal and plastic parts. Please note the pulley on this unit is plastic. To complete this repair you would need a screwdriver and snap-ring pliers.

This is a genuine OEM sourced replacement part designed for use with Eureka vacuums. It consists of a rubber drive belt and a plastic brush roll mechanism which spins the roller. The gear to drive the brush roller is included in this drive assembly. Please note the gear is not sold separately. To complete this repair you would need a sc...Read morerewdriver. • Remove the screws on the top cover • Remove the top cover to gain access to the drive assembly • Remove three (3) screws take out the brush roll drive assembly • Secure the new drive assembly and the belt • Re-assemble and test the unit

This is a genuine Eureka replacement part designed for the AirSpeed series. It fits onto the front edge of the brushroll chamber. The brushroll chamber is the clear plastic housing that covers over the top of the brushroll. This furniture guard snaps into place with no other tools or parts required. It is a gray plastic part that comes as one single piece.

This genuine Eureka part is designed to fit upright vacuums. It is a yellow plastic knob. This knob controls the brushroll action. The brushroll can be turned on to more effectively clean dirt from carpets. The brushroll should be turned off when using vacuum on hard surfaces or when using accessories. Note that this part is sold individu...Read moreally without a screw or knob cap included. Commonly Purchased With: • 84898-692M Knob Cap • 53238-27 Screw Package

This is an original Eureka replacement part. The pedal spring is designed by the manufacturer for use in vacuums. This part is made of metal, and is used to provide tension to the switch pedal assembly in the cord reel housing. This part is sold individually.

The hopper cover attaches to the hopper. This is available as an individual replacement part. This authentic item is supplied directly from the original equipment manufacturer for use with paint sprayers and pumps made by SprayTECH. During replacement, no tools should be needed to install this part correctly. It is made of plastic and will require replacing if it breaks.

This is a genuine OEM sourced part which is specially designed for use with SprayTECH and Wagner sprayers. It is an identical replacement for a missing or a faulty outlet spring that was installed on a new unit. The part is utilized to apply tension on the ball that sits in the valve seat. Please make sure to refer to the appropriate diag...Read morerams of your model for the correct location and application of this hardware. Keep in mind this high-quality component is made of durable metal and is sold individually.

This is a genuine part sourced directly from Eureka. It fits the AS1101A Air Speed Suction Seal vacuum. This listing is for one separation system module. This Module Assembly Includes: • 84668-1 Dust Cup Lid • 67600-2 Filter Package • 83780-1 Inner Cyclone • 85183-313N Cone • 83789-1 Screen • 84666-1 Cup

This is a genuine Eureka part designed for their AirSpeed vacuums. It is part of the main nozzle base. This part includes the cover for the brushroll Disturbulator (part # 63391-6) as well as the hose that connects into the main suction hose. This part includes the Furniture Guard & Graphic (part # 84907). One assembly is included.