ART31 Refrigerator - Parts

A zip tie, also known as a cable tie or a wire tie, is a fastening device that holds wires or tubing together. If a machine has wires or tubing that are easily shifted, you need to hold them tightly together using a zip tie. It is a flexible, plastic strip that has serrated teeth and a locking mechanism. If the zip tie is damaged, it shou...Read moreld be replaced. Freely moving wires may rub against surfaces, causing them to break over time. Zip ties are single-use and may not be reused after they are removed from a machine. To release the locking mechanism, you will need to insert a small flat tool into the head of the zip tie, between the tongue and the serration, and depress the bar. You can then pull the teeth out of the mechanism to loosen the cable tie. This part is produced by the original equipment manufacturer and is sold individually.

This refrigerator compressor kit is designed to regulate cooling by compressing and circulating refrigerant gas through the sealed system. As a positive displacement pump, it ensures consistent temperature control in both the refrigerator and freezer compartments. Built for durability and precision, this OEM-quality component restores opt...Read moreimal functionality when your appliance is running warm, failing to cool properly, or showing irregular temperature performance. Due to the complexity of installation, a licensed appliance repair technician is required for proper setup.

This compressor mounting kit is a set of components used to secure and support the compressor in refrigerators. The kit is supplied by the original manufacturer, and it includes 4 rubber grommets/bushings and 4 mounting screws. The rubber bushings function as buffers between the compressor and mounting brackets to reduce movement and nois...Read moree from the appliance, and the mounting screws hold the compressor in place to provide additional stability. Over time it is normal for these components to wear down or become damaged or loose, leading to increased vibrations, excessive noise, and potential damage to the compressor and surrounding parts. Disconnect the power supply and remove the rear appliance cover to access the compressor unit. Remove the mounting screws and lift the compressor out of the refrigerator. Carefully remove the rubber bushings off the unit and press the new ones into place. Place the compressor back in the refrigerator and secure it with the new mounting screws. Reattach the rear cover to complete your repair.

Sold individually.

This start device supplies the electrical boost required for the motor to start smoothly and operate consistently. Proper starting reduces strain on critical components and helps prevent repeated cycling or failure to start. Replacing a faulty start device restores reliable motor operation and supports long-term appliance performance.