- Home
- AMV5164ACB
- Instructions
AMV5164ACB Amana Microwave - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
cracked revolving cooking tray
-
miriam from brookline, MA
- Really Easy
- Less than 15 mins
OMG! I wish everything in life were so easy.....The cooking tray of our 15 year old microwave cracked and I swore it'd be impossible to find a replacement. That is until I discovered Partselect.com!!All I had to do was input the appliance brand and part I was looking for, and there is was. Thank you, Partselect.com!!
Was this helpful?
Thank you for voting!
Stopped working completely
-
Ramo from Sylvan Grove, KS
- Really Easy
- Less than 15 mins
-
Screw drivers
My wife was pushing a few buttons with her knuckle (hands were full)and the microwave just turned off. Just like we had blown a breaker. First I unpluged it. Then I removed the phillips screws of the front panel, and found and removed the ceramic fuse. 3 days later I received the new fuse in the mail, and put it in. I plugged the micr
... Read more
owave back in and it works great.
Read less
Was this helpful?
Thank you for voting!
Needed a new bulb under the microwave.
-
Norma from Unionville, MO
- Really Easy
- Less than 15 mins
-
Screw drivers
After unplugging the microwave and removing the screw, I removed the old bulb and put in the new one!! I made sure it was in securely and the difference in the light was awesome! I use this light when I bake bread and let it rise inside the microwave, but DO NOT turn it on. The heat from this light helps the bread to rise properly!!
Was this helpful?
Thank you for voting!
Burned out light bulb
-
Ray from Gatlinburg, TN
- Really Easy
- Less than 15 mins
-
Screw drivers
Replaced light bulb.
Was this helpful?
Thank you for voting!
Burn't out bulb.
-
Carter from McCordsville, IN
- Really Easy
- Less than 15 mins
-
Screw drivers
Removed the glass cover and replaced the bulb. Very simple.
Was this helpful?
Thank you for voting!
microwave would not heat.
-
outstanding from Galena, MD
- A Bit Difficult
- 1- 2 hours
-
Pliers, Screw drivers
hardest part was taking the microwave down off of the wall to gain access to the diode. Thought if was the transformer but ended up being just a blown diode. remove and replace and bench test. that part took 15 minutes . moral of the story don't boil water under the side of the microwave that holds the electric components.
Was this helpful?
Thank you for voting!
I broke the dish in my microwave unit.
-
M. J. from Chester, NH
- Really Easy
- More than 2 hours
I simply went on line to Part Select, placed my order, made payment, and was astonished to see the package with a new dish sitting on my doorstep the next day.Great service.
Was this helpful?
Thank you for voting!