- Home
- AMV2174VAD5
- Instructions
AMV2174VAD5 Amana Microwave - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Lightbulb burned out
1 of 4 people
found this instruction helpful.
-
Roland R from NORTH ANDOVER, MA
- Very Easy
- Less than 15 mins
-
Screw drivers
Removed one screw lowered glass cover removed burned out bulb replaced with new one put glass back reinstalled screw. Dune 5 minutes back in business
Was this helpful?
Thank you for voting!
Charcoal Filter Replacement
0 of 1 people
found this instruction helpful.
-
Charles from Meridian, MS
- Really Easy
- Less than 15 mins
-
Screw drivers
This is an under the counter microwave. Simply removed the two screws holidng the vent grille on top of the unit, lift out the old charcoal filter, clean the vent fan exit surfaces then replace the filter and put the vent grille back. Be careful to not drop either of the two screws after one is installed as you will have to take the gri
... Read more
ll off and start the screw installation again unless you have a magnetic to retrieve the dropped screw. An easy five minutes at most to change.
Read less
Was this helpful?
Thank you for voting!
broken
0 of 1 people
found this instruction helpful.
-
Donald from Pompano Beach, FL
- Really Easy
- Less than 15 mins
put the turntable in and had a Rum and Coke to celebrate. Your service was GREATTTTTT...
Was this helpful?
Thank you for voting!
Foreclosed home: parts were missing
0 of 2 people
found this instruction helpful.
-
OLIV from OAKLEY, CA
- Really Easy
- Less than 15 mins
Having the correct model number helps:
Just place the parts in the microwave and it worked.
Just place the parts in the microwave and it worked.
Other Parts Used:
Was this helpful?
Thank you for voting!
Burnt Out Light Bulb Replacement
9 of 30 people
found this instruction helpful.
-
alfred from summerville, SC
- Easy
- Less than 15 mins
-
Screw drivers
Open compartment, installed bulb, closed compartment
Was this helpful?
Thank you for voting!
Filter dirty
-
John from Denver, CO
- Easy
- Less than 15 mins
-
Screw drivers
I unscrewed the filter cover, replaced the charcoal filter and replace the cover. The other wire mesh filter slides right into place. You sent me the right parts for my filter replacement on my microwave. Easy install. Thanks
Other Parts Used:
Was this helpful?
Thank you for voting!
in 2 yrs the charcoal filter had NEVER been changed and it was smelling horrible--so had to be done !
-
carole from North Canton, OH
- Easy
- Less than 15 mins
-
Screw drivers
--simpley removed 2 screws, removed old filter--but had PLENTY of cleaning to do before putting in the new filter !My husband LOVES to cook and pan fry foods--it won't go that long before being replaced in the future!
Was this helpful?
Thank you for voting!
Needed a clean filter
-
Ethel from New Berlin, WI
- Easy
- Less than 15 mins
-
Screw drivers
Stood on a step stool (microwave over stove), took off the one panel,removed old filter and put in new one
Was this helpful?
Thank you for voting!
The capacitor was melted in the microwave
-
Jocelyne from Fort Pierce, FL
- Really Easy
- Less than 15 mins
-
Screw drivers
My husband open the microwave and see the capacitor melted. He try to find the piece in store,but unfortunatly he didn't find any. I found the piece on the web and ordered it. My husband replaced the part easily. The microwave work very well.The microwave was to our friend. He did replace it by a new one. Now we have a new microwave with
... Read more
a fan.
Read less
Was this helpful?
Thank you for voting!
Broke glass tray
-
Katherine from Cleveland, TN
- Really Easy
- Less than 15 mins
Arrived in 24hours!!! Great.
Was this helpful?
Thank you for voting!
Reminder signal and message to change filter on microwave digital display.
-
Susan from North Olmsted, OH
- Really Easy
- Less than 15 mins
-
Screw drivers
Removed 2 screws on the top of the microwave and removed top/front piece of microwave. Slid out old filter (which didn't look dirty at all) and replaced it with the new one. Replaced top/front piece and 2 screws. It took less than 5 minutes.
Was this helpful?
Thank you for voting!
broken glass cooking tray for microwave
-
Vanessa from Atlanta, GA
- Really Easy
- Less than 15 mins
Twas really easy considering that all I had to do was place the plate back in the microwave. Easy Peasey
Was this helpful?
Thank you for voting!
broken glass microwave tray
-
Ronald from Rhinelander, WI
- Really Easy
- Less than 15 mins
Tray arrived in a short period of time and was a perfect match.
Was this helpful?
Thank you for voting!
Broken turntable support ring and missing support
-
Sharon from Pleasanton, CA
- Really Easy
- Less than 15 mins
Watched video which reminded me to order support for the turntable support ring and did exactly what the person in the video did. Excellent and prompt service and all parts fit.
Other Parts Used:
Was this helpful?
Thank you for voting!
glass turn table would not turn
-
CJ from Bullard, TX
- Really Easy
- Less than 15 mins
After researching online, I found that I needed the turntable drive coupling, part#PS993087. when I went to your site it showed the same part but the part number had changed but said it would fit my microwave. Well, I was really surprised and happy when the part I received 3 days after I placed the order, with normal shipping,fit perfectl
... Read more
y and now my turn table in my microwave works. I have marked this site a a favorite and will use it I'm sure soon. Being a single women and having to figure out how to fix the things on a small buget, I'm learning a lot and have a lot of respect for men that know how to do all the repair stuff. Thanks so much, I have been able to mark this off my list of things to fix. Have a nice day. Cj- age, 58
Read less
Was this helpful?
Thank you for voting!