EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖
Sign In | Create Account
| Your Account

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos
Keep typing for more specific results...

Parts Departments

Top Model Types View All

Expert Repair Videos

Symptoms

Troubleshoot like a pro using your model's symptoms

View symptoms

Model Number Locator

Find your model number to unlock guaranteed fit

Find my model number

Articles & Guides

How to Fix a Samsung Dryer 3C Error Code - PartSelect

If a Samsung dryer is displaying a 3C error code, there is a communication issue with the motor and control board. In this article we’ll cover how to fix this issue.

How to Reset Your Bosch Dishwasher - PartSelect.com

A step-by-step guide to resetting a Bosch dishwasher. Learn what errors and issues a reset can fix, how to do a soft reset, and how to do a hard reset.

How to Fix an F11 Code on a Frigidaire Oven - PartSelect.com

Learn how to clear the F11 error code on your Frigidaire oven and replace the keypad overlay and electronic control board with our easy DIY how-to guide.

 See more articles & guides
  1. Home
  2. ALW9
  3. Instructions

ALW9 Amana Washer - Instructions

All Instructions for the ALW9
91 - 98 of 98

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
wouldnt spin properly
  • Dorothea from Tomah, WI
  • Really Easy
  • 30 - 60 mins
  • Socket set
removed motor removed belt replaced belt,spring,idler wheel, slid back motor in 4 bolts,plug in motor, run good on test run
Was this helpful?
Thank you for voting!
Not spinning
  • Mark from northeast, MD
  • Really Easy
  • 30 - 60 mins
  • Screw drivers, Socket set
I opened the bottom and found the belt had broke in half. i ordered a new belt from Maytag online and found a you tube video that showed exactle how to change it. the only thing i had to do afterwards was tighten the tensioner.eazy pezy!
Was this helpful?
Thank you for voting!
pump seal leaking
  • james from Cornville, AZ
  • Easy
  • 30 - 60 mins
  • Nutdriver, Socket set
After pulling front lower panel off, disconnected idler pulley spring and left side tub stabilizer spring to allow room to get motor out the front. Took belt off transmision pulley, unbolted 4 motor mount bolts, dropped the motor/pump assembly down and disconnected the electrical plug (motor). Took motor/pump assembly out, flipped it over , unbolted 3 pump bolts to remove old pump, which came right off. Then reversed the whole process. Pretty straightforward, just time.
Read less
Was this helpful?
Thank you for voting!
All Instructions for the ALW9
91 - 98 of 98