All Installation Instructions for Husqvarna AG22

Wheel bushings were bad

29 of 48 people found this instruction helpful.

Anthony from OLIVEHILL, TN
Easy
15 - 30 mins
Pliers, Screw drivers

Removed old clip removed rim from tractor, removed grease fitting on rim, took hammer and screw driver knocked out old bushing turned rim over knocked out other bushing. Press in new bushings reinstalled grease fitting slide tire back on tractor, put retaining washers on then locking clip put on dust cover grease at grease fitting. Repeat ... Read more

Read less

Other Parts Used:

Lawn Mower Ring Clip

Cap Axle Black 1 50 x 1 00

Was this helpful?

Needed to replace the bent blades on my riding mower.

17 of 30 people found this instruction helpful.

Trace from LISLE, IL
Very Easy
15 - 30 mins

- Made the mower safe to work on the blades (remove spark plug wires, etc.)

- Raised the mower to get access to the blades, wedged a wood block against the blade.

- Used impact driver with socket to remove bolt holding blade.

- Removed blade, replaced with new, replaced bolt and tightened with impact drive ... Read more

Read less

Was this helpful?

Broken v-belt for drive

2 of 7 people found this instruction helpful.

Paul from ROCKTON, IL
Easy
30 - 60 mins
Pliers, Wrench set

I returned the belt because it was the wrong part. Ordered the correct belt from another source. After that the replacement went well and I crossed off Parts Select from my list.

Was this helpful?

Front wheels, too much end play

10 of 38 people found this instruction helpful.

Frederick from BINGHAMTON, NY
Very Easy
Less than 15 mins

Shimmed the wheels out on axle.. No more slop.

Was this helpful?

AG22 Husqvarna - Instructions