- Home
- ACG150NLD0
- Instructions
ACG150NLD0 Frigidaire Refrigerator - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
fit was perfect
-
John from White city, OR
- Really Easy
- Less than 15 mins
replaced broken end cap
Was this helpful?
Thank you for voting!
I inherited this old refrigerator as part of the space where I now live. I found the bottom shelf bar for the door tucked away under the sink, but there were no brackets. I'm sure they were broken and discarded at some earlier time.
-
Gregory from Alexandria, MN
- Really Easy
- Less than 15 mins
I snapped the brackets into the ends of the shelf bar, then inserted them into the holes in the door and pulled down each end until it snapped in place.
Other Parts Used:
Was this helpful?
Thank you for voting!
shelf end caps both broke and the rack came off
-
Ingrid from Fitzgerald, GA
- Really Easy
- Less than 15 mins
inserted shelf caps into rack strip then into openings and hit them with my fist (gently) till they 'seated' and locked
Other Parts Used:
Was this helpful?
Thank you for voting!
My Frig Light Stopped
-
Susan from Rapid City, SD
- Really Easy
- 15 - 30 mins
-
Screw drivers
I am a 65 year old woman with no mechanical aptitude: I just unplugged the frig. And used a screw driver to pry of the plastic socket from its outside edge. . Then you just unplug two tiny contact plugs that appear when you pull out the socket and replug in those two the same way on the new part. Pop the socket back into the hole . .
... Read more
. . And screw in the new bulb. I knew I needed the socket part cause when the bulb burned out , a new bulb still did not work. . . If I can do it, anyone can!
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!