My Orders
ACF425 Amana Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Stove Range Drawer Difficult to Open and Close
-
Hau from Burke, VA
- Easy
- 15 - 30 mins
-
Nutdriver
Insert one end of the railing into the slot in the back of the stove. Align the front end of the railing with the hole at the front of the stove. Align the roller with the hole. Secure the front end of the railing, roller ,and hole with the shoulder bolt using a 10mm wrench. Tighten just enough but don't over tighten.
Was this helpful?
Thank you for voting!
Burner stopped heating
-
Anna from Copperas Cove, TX
- Really Easy
- 15 - 30 mins
-
Pliers, Screw drivers
My husband did the repair. It was so easy that I could have done it. He had to remove 3 screws and then hook up the element. Nothing to it!!
Was this helpful?
Thank you for voting!
range installer broke a screw off & busted the plastic piece
-
Christina from West Des Moines, IA
- Easy
- 30 - 60 mins
-
Pliers, Screw drivers
Had to screw off old terminal block & screw on new one
Was this helpful?
Thank you for voting!
Inner element dead
-
John from Lancaster, PA
- Easy
- 1- 2 hours
-
Screw drivers
Pulled range away from wall and unplugged it. Pulled smoothtop out a bit to clear retaining clips. Swung top up and unplugged the cable going to top. Removed top hinge so top could be removed. Put top upside down on a table to work on. Removed wires from bad burner and then removed screws holding the burner in place. Replaced bad burner w
... Read more
ith new one and reversed the previous steps. Range worked like new. PartSelect service was great, received the part in one day.
Read less
Was this helpful?
Thank you for voting!