- Home
- A3110PRALT
- Instructions
A3110PRALT Admiral Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Had to replace thermostat knob on an older Magic Chef oven. I The only knobs I could find locally ib hardware stores were useless. The adapter supplied with these kits was much too short about 1", needed about 3" to connect to knob.
-
Florence from Elmhurst, NY
- Really Easy
- Less than 15 mins
I was pleasantly surprised that the knob I ordered from you was perfect. Your catalog picture/description was right on. I am so grateful I found your site. I looked @ others and they did not compare to your thorough description. Thank you.
Was this helpful?
Thank you for voting!
Door seal was pulled out by grandson.
-
Michael P from Hickory Hills, IL
- Really Easy
- Less than 15 mins
-
Pliers
finished removing door seal, used pliers to remove old securing studs. positioned new seal and pushed securing studs into existing holes and was done.
Was this helpful?
Thank you for voting!
cracked and missing paerts of the seal
-
Cynthia from Petersburg, IL
- Really Easy
- Less than 15 mins
Popped in there real quick. Wish I would have done it sooner, my oven heats up much faster.
Was this helpful?
Thank you for voting!
Broken thermostat knob
-
Thomas from Bishop, CA
- Really Easy
- Less than 15 mins
Pushed on new knob. I was concerned temp markings would not be accurate so I purchased an oven thermometer. The markings were accurate to actual oven temp at 350 degrees so I am very happy with the replacement part. Thank You.
Was this helpful?
Thank you for voting!
Numbers Were Wore Off Of The Old Knob So Couldn't Tell What Temp The Oven Was On
-
Eleanor from Flat Rock, MI
- Really Easy
- Less than 15 mins
Removed old knob and took new knob out of package and just slipped it on the stove. Less than a minute.
Was this helpful?
Thank you for voting!
Thermostat Knob broke
-
James from Tallahassee, FL
- Really Easy
- Less than 15 mins
I couldn't find my model number U31EA-7 so I decided to go with a deferent model number U31FA-7 Pulled the old Knob off and pushed the new knob on and it works great
Was this helpful?
Thank you for voting!
As easy as it could be
-
Phillip from Twentynine Palms, CA
- Really Easy
- Less than 15 mins
-
Pliers
I have worked in maintenance field most of my adult life and all aspects and to change the oven door gasket was no challenge what so ever. It took longer to find my needle nose pliers to remove the old gasket clips and then re-install the new gasket. Maybe 10 minutes total
Was this helpful?
Thank you for voting!
Rubber seal was broken
-
Jennifer from Lynn, MA
- Really Easy
- Less than 15 mins
-
Pliers
Broke the same day I installed it
Was this helpful?
Thank you for voting!
Oven knob was broken & stove was old
-
Janice from Springfield, MO
- Really Easy
- Less than 15 mins
Pushed the knob on to the part that was sticking out. Knob fit perfectly...had to use a substitute part & wasn't sure it was the right part, so was pleasantly surprised!
Was this helpful?
Thank you for voting!