96012002803 Poulan Lawn Tractor - Parts

It is a genuine item that is supplied by the original equipment manufacturer for use with Craftsman lawn and garden equipment. This is a high-quality replacement for a missing or a faulty spring that was installed on a new unit. The purpose of this component is to apply tension on the guard allowing it to retract, please make sure to refe...Read morer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality part is made of durable metal and is sold individually.

This is an authentic OEM component from Briggs & Stratton. The intake valve is compatible with many small engines, and is sold individually. This durable metal component is fitted inside the cylinder head, managing the proper amount of fuel and air flowing into the carburetor. For the repair, you may need a wrench set, screwdriver and a socket set.

Original Manufacturer Approved replacement Mandrell Shaft Assembly used on Lawn Tractors/Mowers. Includes all Metal shaft assembly, bearing, and nut. The Mandrel shaft is secured in Mandrel Housing and it goes through the deck and the pulleys are attached to it. Then the belt that drives the mandrels is placed on the pulleys. When replaci...Read moreng this part, First remove the Blade from the Mandrel Shaft. The Mandrel Assembly is easily detached by removing the three Washer Head Screws from above the Mandrel Housing on the Mower Deck . You will need to remove the Nut that is attached to the Mandrel Shaft, which is located above the Mandrel Pulley. The complete Mandrel Assembly should come right out now. Remove old Shaft from the Housing and place a new one in place of it. Re-attach the now Complete Mandrel Assembly back to the deck and attach pulleys, belts and blades.

This is an original replacement part manufactured for use with riding lawnmowers. Fuses are used as a safety device that can prevent overloading an electric circuit by breaking or melting and interrupting the circuit. This fuse is available as an individual replacement part.

It is an authentic item that is supplied directly from the original equipment manufacturer for use with Craftsman lawn and garden equipment. This is an identical replacement for a missing or a faulty tractor lift assembly link that was installed on a new unit. Please make sure to refer to the appropriate diagrams of your model for the cor...Read morerect location and application of this component. This high-quality assembly is made of durable metal and is sold individually, keep in mind the hardware to secure it is sold separately.

This is a genuine replacement part manufactured for use with riding lawnmowers. This is the outer tire for the front wheels. The tire tread wears from normal use, it is recommended to replace worn tires. This tire is sold individually, the inner tube and other associative parts are available separately.

It is an authentic item that is supplied directly from the original equipment manufacturer for use with Husqvarna and Poulan lawn and garden equipment. A washer is generally utilized to provide a tight seal between connected parts, over time it may wear out or simply get lost eventually requiring a replacement. Please make sure to check t...Read morehe appropriate diagrams of your specific model for the correct location and application of this hardware. Keep in mind this durable metal washer is sold individually.

This headlight switch is designed for use with various models of ride-on mowers/tractors, features an on/off mode for turning the headlines on and off, and is a genuine OEM part. If your headlights do not turn on, it is recommended that you inspect the light bulbs before replacing this switch. It is recommended that if you have a multimet...Read moreer, you test this switch for continuity prior to ordering a new switch. To replace this switch, lift or gain access to the steering housing of the lawnmower. Locate the tabs securing the switch, which will be underneath where they appear on the user interface panel. Push the tabs on the side of the switch inwards to release the switch out from its panel, and then disconnect the wires from the switch, taking note of their positions. Connect the new switch terminals to the previous wires, push the new switch into its panel, and test the lights to make sure they work.

This item has been sourced from the original manufacturer to be used with riding lawnmowers from Husqvarna. The metal rim is the center of the wheel assembly and is used to support the tube and tire. This item is used for the front wheels and is sold individually.

It is a genuine OEM sourced part is specially designed for riding lawn mowers and garden tractors. The solenoid acts like an electromagnetic switch, it engages and routes the battery electrical supply to the engine starter when the ignition switch is rotated to the start position. Unfortunately, over time it may wear out or get damaged ev...Read moreentually requiring a replacement. Keep in mind this high-quality solenoid is sold individually. You will need a screwdriver and a wrench set to perform this repair.

It is a genuine OEM sourced replacement part which is specially designed for use with Shindaiwa and Echo handheld lawn and garden equipment. This item is a standard hardware which has multiple applications depending on the model of your unit, please make sure to check appropriate diagrams for correct location and use of this item. It is a...Read more high-quality hex head screw which is made of durable metal and it is sold individually.