911332 Kenmore Cooktop - Instructions

Ordered by phone parts & very pleased with all of transaction.

Simply removed the 9 T9 screws from the top of the cooktop, removed the igniter spark modules, lifted the top of the cooktop up and removed harness assembly. Unplug harness from spark module and replaced in same fashion. SUPER EASY done in less than 15 minutes

We had flooded the stove from boiling and after that the ignitors kept firing. We had to unplug the unit and light manually. Not sure exactly what the problem was, but I replaced the module and harness. Very easy. 1. Unscrew hex nuts, you can buy a hex nut set anywhere. 2. Pull out ignitors. 3. Cut or peel away caulking, if you did this. ... Read more 4. Carefully lift lid off and set aside. 5. Unscrew module and scree back on. 6. replace harness exactly as you find it. 7. Make sure all colors go back into module as originally set. 8. place lid back on and replace the ignitor. Really very easy. Thank you!

Turned off gas supply, removed 2 hold down screws, removed cook top from counter top, disassembled 8 housing to top panel bracket screws with nut driver & 8 burner screws with allen wrench & 4 burners, removed 4 burner knobs, lifted top panel from base & shifted it about 5 inches to access gas valves, removed 4 igniter switches & replace ... Read more d with the new igniter switches, reassembled the cook top in reverse order, checked for gas leaks & successfuly tested ignition of all 4 burners.

Replaced burner gaskets.

Disassemble (8) Nutdriver screws from burners.The hardest part was removing the spark igniters which took the longest time to remove only because i was trying to save three, and replacing one igniter.It required cleaning old gasket material off burners.then removing white porcelain top and replacing the spark igniter switch and harness as ... Read more sembly.then reverse assemble.