8888 - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Reusable Grease filter was old and worn out.
5 of 7 people
found this instruction helpful.
-
Gloria from Galveston, TX
- Really Easy
- Less than 15 mins
The Model number could no longer be read clearly on the stove electric grill with a down draft vent system, so all I had was the size and looks of the old grease/air filter. I was very happy to come across Parts Select by way of an amazon.com search. Their web site's design and the parts pictures with detailed descriptions made it eas
... Read more
y to find exactly what I needed. The grease filter fit perfectly in no time. I have successfully used my cooking grill again.
Read less
Was this helpful?
Thank you for voting!
The control knobs on our otherwise "healthy" Jenn-Air range were worn off and did not turn stove on correctly.
4 of 4 people
found this instruction helpful.
-
Brad from Clay City, IL
- Really Easy
- Less than 15 mins
Simply pulled the old ones off and pressed on the new control knobs. It took less than 10 minutes, saved us from replazcing an otherwise nice looking range top, and made a big deposit in my "Honey do" account. I just wish they still sold the clock and timer units to fit this stove. Oh and yes, the prices were very reasonable too.
... Read more
Thank You Brad Harris, Illinois
Read less
Was this helpful?
Thank you for voting!
smell of a dead animal
3 of 4 people
found this instruction helpful.
-
Duane from Niceville, FL
- Really Easy
- Less than 15 mins
The 15-year-old Jen-Air stove started smelling really bad. I thought it was a dead animal stuck in the exhaust tube which runs under the floor to the outside. I flushed it out with clorine bleach, but it was still bad. It turned out to the be the grease filter. I washed it every week in the diswasher, but it just was not enough to get
... Read more
it clean enough. Finally, the grease went rancid and smelled really bad. This "repair" took about 30 seconds.
Read less
Was this helpful?
Thank you for voting!
old filter to replace
2 of 2 people
found this instruction helpful.
-
Colette from Baton Rouge, LA
- Really Easy
- Less than 15 mins
:-) - Just removed the old one and replace with the new one. Nothing to it. Takes 30 seconds.
Was this helpful?
Thank you for voting!
Knobs were worn badly
2 of 3 people
found this instruction helpful.
-
Royce from Garland, TX
- Really Easy
- Less than 15 mins
Pulled off old knob, then pressed on the new one.
It was very easy, and the part was the correct one.
It was very easy, and the part was the correct one.
Was this helpful?
Thank you for voting!
Numbers on surface burner knobs were illegibel.
2 of 3 people
found this instruction helpful.
-
Wayne from NEENAH, WI
- Very Easy
- Less than 15 mins
I also sprayed them 3-times with a clear coat before installing. The clear coat I purchased at WalMart once I noticed it claimed to be safe for plastic. Avoid a clear lacquer based product.
Was this helpful?
Thank you for voting!
Change the Oil/Grease Filter
2 of 3 people
found this instruction helpful.
-
Yong from Houston, TX
- Really Easy
- Less than 15 mins
It is so easy. Once I found the right size of filter from the website, I ordered it right away. It came in 3 days and I just need to take out the old one and insert the new one. No instruction is necessary. By the way, the price of the filter is one third of that from Jenn-air.
Was this helpful?
Thank you for voting!
my old knobs were so worn that I couldn't see the numbers
2 of 4 people
found this instruction helpful.
-
Lynne from Weatherford, OK
- Really Easy
- Less than 15 mins
I had tried several other "universal" brands from the home improvement center but nothing worked with my Jen-Aire. I finally ordered from PartSelect and they fit perfectly! My range-top looks brand new and finding and ordering the correct parts was amazingly easy. Thanks!
Was this helpful?
Thank you for voting!
All four knobs were stripped
1 person
found this instruction helpful.
-
Christy from MOLALLA, OR
- Very Easy
- Less than 15 mins
We cleaned the rod on the stove and pushed the new knobs into place. This Jenn Air range was made in 1980. Nice to know Jenn Air is still making parts for their ranges. We also ordered new coil elements which fit perfectly size 6 inch and 8 inch.
Was this helpful?
Thank you for voting!
Burner knobs were wearing out, metal rims were falling off.
1 person
found this instruction helpful.
-
beatrice from TUCSON, AZ
- Very Easy
- Less than 15 mins
Just slid off the old burner knobs, and pushed on the new ones. The most difficult part of the whole thing was just being sure that I ordered the correct knobs that used a D fitting. I ordered some a year ago that weren't the correct fitting.
Was this helpful?
Thank you for voting!
blower motor was making loud noise
1 of 2 people
found this instruction helpful.
-
alphonso from plainfield, IL
- Easy
- 15 - 30 mins
-
Pliers, Screw drivers, Socket set, Wrench set
removed motor, saw that stablizers were broke and went to a local parts supply shop called SUNDBERG and was given a price of about 49.00 for three stablizers. at that point i went to the internet and found PARTSELECT.COM were i found the same parts for a fraction of the price,17.00, i could not believe it! SUNDBERG customer service was h
... Read more
orrible.PARTSELECT custormer service is great and was just over the internet,any how the repair is done no more loud noise and wife is happy again ,for awhile.thanks keep up the good work.i tell everybody about you guys.
Read less
Was this helpful?
Thank you for voting!
The original grease filter was damaged in our dishwasher (it is quite fragile) and needed to be replaced.
1 of 2 people
found this instruction helpful.
-
Martyn from Middletown, OH
- Really Easy
- Less than 15 mins
1. Remove the exhaust vent cover, located in the center of the top of the range. It just lifts off.
2. Swivel the clamp 90 degrees to release the filter.
3. Remove the filter and throw it away
4. Place new filter in place and lock in place by rotating the swivel clamp back 90 degress.
5. Replace the exhaust vent cover
2. Swivel the clamp 90 degrees to release the filter.
3. Remove the filter and throw it away
4. Place new filter in place and lock in place by rotating the swivel clamp back 90 degress.
5. Replace the exhaust vent cover
Was this helpful?
Thank you for voting!
Elec. stove-top knobs (imprinted with HI to LO numbers 1 to 10)worn to non-readable.
1 of 2 people
found this instruction helpful.
-
Lenice from Stuart, FL
- A Bit Difficult
- 30 - 60 mins
Knobs sent fit the shafts, but due to molded internal stop wouldn't seat. Had to drill out the stop, and also file down the shafts a bit for knobs to seat acceptably closer to stove-top.
Was this helpful?
Thank you for voting!
knobs were getting hard to read.
1 of 2 people
found this instruction helpful.
-
Dave from Bloomingburg, NY
- Really Easy
- Less than 15 mins
Pulled old knobs off, pressed new ones on. Probably well under a minute for 6 knobs. Anyone with the IQ of a horseradish could have done it. But what was really great was the help and personality of the agent at the other end of the phone. Shipping was as promised, and the entire experience was delightful!
Was this helpful?
Thank you for voting!
Old Stove Top
1 of 2 people
found this instruction helpful.
-
Robert A from Farmington `, CT
- Really Easy
- Less than 15 mins
Ordered new cartridges
Was this helpful?
Thank you for voting!