8524 - Parts

This is a genuine manufacturer-sourced replacement screw which is specially designed for use with Craftsman lawn and garden equipment. It is a standard hardware which has multiple applications depending on the model of your unit, please refer to the appropriate diagrams for the correct location and use of this item. This part is made of h...Read moreigh-quality metal and it is sold individually, you will need a wrench to secure or remove it.

This metal flange bearing is an authentic manufacturer-sourced component which is designed for use in lawn and garden outdoor equipment. It is bronze in color, with 6 six flat sides, and it has an inner diameter of 0.75 inches, and a height of 1 inch. It also features a protruding circular rim on one end, known as a flange, which keeps th...Read moree bearing stable and secure. The bearing serves as a support mechanism, allowing rotating parts to move smoothly with minimal friction. Over time the bearing may wear down, crack, or fall off causing excessive noise, reduced performance, and potential damage to the snowblower impeller or auger. Use a bearing puller tool to pry the bearing off the equipment. Align the new flange bearing with the mounting holes and secure it in place.

A genuine item that is supplied by the original equipment manufacturer for use with lawn and garden equipment. It is a high-quality screw which has a few different applications depending on the model of your unit, please refer to the appropriate diagrams for the correct location and application of this hardware. Keep in mind this durable metal component is sold individually.

This authentic part is supplied by the original equipment manufacturer and is specially designed for use with snowblowers. The extension spring is utilized to apply tension on the auger belt idler arm. Unfortunately, over time it will wear out and it may begin to stretch eventually requiring a replacement. This high-quality extension spri...Read moreng is made of durable metal and is sold individually. Make sure to check the diagrams for your model to ensure the proper repair procedure.

This is a genuine replacement part sourced from the original manufacturer for use with snow blowers made by Husqvarna and Poulan. This part attaches to the drive control rod and manages the movement of the shift lever. You will need pliers to replace this part. This spring traction drive is sold individually and made of metal.

This manufacturer approved replacement part is designed for snow blowers/throwers. Skid shoe/plate allows you to avoid damage and keep smooth control over cracks, gravel, and other uneven surfaces. It is made out of metal and it is sold individually. Please note the left skid plate is sold separately. It is advised to replace both skid p...Read morelates at the same time. To complete this repair you will need a wrench. • First remove bolts holding old skid plate • Remove old plate and insert new skid plate • Level snow blower and adjust skid plates to desired height • Tighten skid plate bolts

This is a genuine replacement part manufactured for use with lawn and garden power equipment. This versatile screw has a flanged hex head and can be used in a variety of applications. The screw is available as an individual replacement part, please see model diagram for part location and usage.

This is a genuine OEM lube fitting part made for use with various outdoor lawn equipment models and measures 3/16-inch wide. Sold as an individual part, this grease/lube fitting is made of metal and is used to deliver lubrication to whatever it is attached to for better performance, through a small passage in the fitting. If your lube fit...Read moreting needs to be replaced, it may require pliers and a hex wrench for that process. Check your user manual or any diagrams to make sure this is the correct part for your equipment.

This part is sold by color. Please see color options below to see what part number you need to order. Color: Majestic Orange. Part Number: 790-00121-0606. Color: Powder Black. Part Number: 790-00121-0637. Color: MTD/Troy-Bilt Red. Part Number: 790-00121-0638. Color: Red Metallic. Part Number: 790-00121-0650. Color: Oyster Gray. Part ...Read moreNumber: 790-00121-0662. Color: Polo Green. Part Number: 790-00121-0689. Color: Black Jack. Part Number: 790-00121-0691. Color: Mastercraft Green. Part Number: 790-00121-0709. Color: Sears Red. Part Number: 790-00121-4044. Color: Cub Yellow-2. Part Number: 790-00121-4021. Color: Fint Mica. Part Number: 790-00121-4033. Color: Pure Orange. Part Number: 790-00121-4041.

This replacement scraper bar is an authentic item that is supplied directly from original equipment manufacturer for use with Husqvarna and Poulan snowblowers. Scrapers are designed to absorb a lot of friction while the machine is in operation. You can tell that a snowblower has a worn scraper because it will no longer be able to clear th...Read moree sidewalk, leaving patches of snow behind. Please note this scraper bar is sold individually.

It is an authentic replacement part that is supplied by original equipment manufacturer, it is specially designed for use with snowblowers. This is the cover for the belt to protect it and the pulleys from dirt and debris. It is made from durable, high-quality plastic material and it is sold individually.

This authentic OEM hi-pro key, also called a woodruff key or key stock, is a metal component found in your lawn equipment that connects rotating parts. It is 3/16 inch wide and 5/8 inch long. It fits into a specially-shaped slot on a shaft and prevents the parts from moving or slipping out of position while your machine is running. To fin...Read mored and replace a hi-pro key on your machine, check your user guide for instructions. When removing the hi-pro key, insert a flathead screwdriver or needle-nose pliers into its groove and pry it out of its slot. Please bear in mind that this hi-pro key is sold individually.