My Orders
8524 - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Worn belts
9 of 14 people
found this instruction helpful.
-
Fortney Auto Shop from PISCATAWAY, NJ
- Easy
- 15 - 30 mins
-
Screw drivers, Wrench set
Removed bottom plate and belt cover and replaced 3 belts
Was this helpful?
Thank you for voting!
Original shave plate badly worn
11 of 24 people
found this instruction helpful.
-
John from HARRISVILLE, NH
- Really Easy
- Less than 15 mins
-
Wrench set
With WD-40 or equivalent, spray the four nuts on the underside of the snow blower housing that hold the shave plate to the housing. Also spray the two bolts that hold the shave plate to the side of the housing. Let sit for a few minutes and using a 1/2" box end wrench remove the four nuts on the bottom of the housing. If necessary, app
... Read more
ly heat with a torch to loosen. Using a 9/16" box end wrench, remove the nuts on the sides (these also hold the adjustable skid feet). It is recommended that the bottom bolts and nuts be replaced with 5/16-18 X 3/4" long zinc plated carriage bolts using zinc plated washers and ny-lock nuts. It is also recommended that all of th screw threads be coated with an anti- seize lubricant so disassembly at a later date will be easy.
Read less
Was this helpful?
Thank you for voting!
Chunk of wood broke the lower plastic chute.
2 of 5 people
found this instruction helpful.
-
Jason from Cummington, MA
- Easy
- 15 - 30 mins
-
Screw drivers, Socket set
Removed belt cover. Unbolted upper chute mount and removed metal upper chute with cables still attached. Replaced plastic lower chute, 4 bolts and reassembled machine.
Was this helpful?
Thank you for voting!