8423 - Parts

This hex center lock nut is sourced from the original manufacturer for use in lawn and garden power equipment. It is a hexagon-shaped fastener for bolts/studs that is responsible for the keeping the bolt/studs secure during use. The nut is made of metal and has a diameter of 5/16 of an inch and a thread pitch of 18 internal threads per in...Read morech. Over time the threads in the nut can wear down and the nut itself may crack or break. It is important to replace it as soon as necessary to avoid damaging your equipment. Use a socket or wrench to remove the old nut and thread the new one on. Make sure to order the correct number of nuts for your equipment as each nut is sold individually.

This is a genuine Craftsman replacement part that is sourced from the original manufacturer to be used with snowthrowers. The metal hex nut is commonly used to fasten the bolt that secures the height skid to the auger housing. This item is available as an individual replacement part, please note four nuts may be required.

This is a genuine manufacturer-approved part which is specially designed for use with Snapper and Simplicity lawn mowers. It is one of the gauge wheels that are attached to the deck in order to provide support for it while allowing for easy movement. This is an identical replacement for a missing or a damaged component that was installed ...Read moreon a new unit. It is made of high-quality material and is sold individually. Note, the hardware to secure it is sold separately. You will need a socket wrench to remove and secure the bolt that holds the wheel.

This 3/8 Hex Top Lock Nut, also known simply as a lock nut, attaches to the bolt and secures the tines to the tine hub of your tiller, mower, or snow thrower. This is a genuine OEM part, is gold in color and made of metal. If you notice your tine has moved out of place or fallen off, the lock nut may have damaged threads or rounded of end...Read mores due to fatigue and wear, and will need to be replaced. This is a generally easy repair that just requires a wrench or socket and torque wrench. When attaching your new hex top lock nut onto the tines, ensure you torque to the manufacturer specifications.

This is a genuine item that is supplied directly from the original equipment manufacturer for use with Murray, Snapper and Simplicity lawn and garden equipment. It is an identical replacement for a missing or a faulty vented cap that is specially designed to keep the fuel in the tank, please make sure to refer to the appropriate diagrams ...Read moreof your model for the correct location and application of this component. Keep in mind this high-quality item is made of durable plastic and is sold individually.

Seal oil

The wing-nut is made out of metal and attaches to various other parts. It is a genuine OEM sourced part which is specially designed for use with lawn tractors made by Snapper and Simplicity. This part is available as an individual replacement even though several may be needed. It will need to be replaced if it becomes broken or stripped.

This authentic OEM approved replacement bolt is designed to support deck gauge wheel. It is a commonly used item on riding lawn mowers/tractors. It has a hex head and it is sold individually. When installing or removing this bolt please use appropriately sized socket wrench.

This is a genuine replacement part manufactured for use with outdoor power equipment. The special nut is used with a variety of types of equipment and the application of the nut varies depending on the model of equipment. This nut is available as an individual replacement part, please see model diagram for the nut\'s location and usage.

This carburetor inlet seat helps regulate fuel flow into the carburetor by sealing the inlet passage properly. When worn or damaged, it can cause flooding, poor running, or starting issues. Replacing the inlet seat restores correct fuel control and supports smooth, reliable engine operation.

This gasket set is supplied directly from the original equipment manufacturer. This item is constructed of metal and cardboard composite, and has been designed for use with many small lawn and garden engines. Although this part is fitted in the carburetor, please refer to specific manual and diagrams for instructions. The gasket set is sold individually. A screwdriver may be helpful in making the repair.