8423 - Parts

This 5/16 washer, or toothed washer, is sold individually. It provides a tight fit between the knob and the upper handle on a range of outdoor power equipment. It attaches between the wing knob and the upper handle, and over time and through use, can become damaged and need replacing. It is gold in color and metal, and repairing it is an easy task according to our customers.

This genuine OEM sourced part is specially designed for use with Briggs and Stratton engines that are commonly installed on lawn and garden equipment. The pin-float hinge is utilized to secure the float. It is an identical replacement for a missing or a damaged hardware that was installed on a new unit. Refer to the diagrams for your mode...Read morel to ensure the correct repair procedure. Keep in mind this high-quality pin-float hinge is sold as an individual item. You will need pliers to replace this component.

This danger decal in your lawn equipment is a warning sticker that reminds users to keep their hands and feet away from certain parts of your machine. Measuring approximately 4 inches in both length and width, it has the message DANGER, KEEP HANDS and FEET AWAY written on it in English. Typically, this decal is placed near the dangerous p...Read morearts of your machine, such as its blades, discharge chute, nozzle, impeller, or dashboard. If the danger decal becomes worn, torn, or difficult to read, you must replace it as soon as possible to prevent accidents from occurring. You must place it in a visible location where the person operating your machine can see it and it needs to be near the part that it is warning them about. This OEM-certified sticker is sold individually.

This bolt is a genuine replacement part, most commonly found in tillers. It is sold individually, it is 3/8 of an inch in diameter, and made of metal. The bolt may be found in multiple locations, depending on your model, and is not the only style bolt used on most machines. Please refer to the parts diagram to be sure you are ordering th...Read moree correct bolt. This bolt needs to be replaced when the threads become damaged or rounded off. Use caution when replacing this bolt not to damage or strip the bolt, which will cause a wrench or socket not to grip it. To complete this repair, you will need a wrench or socket.

The oil filter attaches to the filter base and is made of metal. This item is available as an individual replacement part. It is an OEM from Snapper and Simplicity for use in tractors. A wrench might be needed during the installation process. It will require replacing if it becomes broken or dirty.

This genuine manufacturer-sourced replacement part is specially designed for use with Snapper riding lawn mowers. A locknut is a type of nut that resists loosening when properly threaded onto a bolt. This is standard hardware which has multiple applications, please refer to the appropriate diagrams of your model for the correct location a...Read morend use of this part. Keep in mind this durable metal component is sold individually.

This is an original replacement part sourced directly from the manufacturer. The hex nut is commonly found in Snapper lawn tractors and riding mowers. This part is made of metal, and is generally used in securing the pulley and mower blade assembly. Please be aware that there are different nuts used in the machine. Refer to the parts ...Read morediagram to be sure of ordering the correct part. You will require a wrench when replacing this item. The hex nut is sold individually.

This is an OEM part directly sourced from the manufacturer for use in Toro snowthrowers and Briggs & Stratton engines. The governor spring is made out of metal. During the installation process, a set of pliers might be needed to replace this item. Over time this part may break or bend and will need to be replaced. This item is available as an individual replacement part.

This high-quality OEM replacement blade is specially designed for use with Snapper lawn mowers. Mulching blades are designed to circulate the grass longer so it can be cut into smaller pieces allowing them to decompose quicker, releasing nutrients into the soil. Over time blades will wear down, become dull or they may warp eventually requ...Read moreiring replacement. This part is made from high-quality steel and is sold individually. Make sure to refer to the owner's manual for your model to ensure the correct application and repair procedure. A wrench will be needed to remove and resecure the hardware that holds the blade.

The pushnut retainer goes next to the ball bearing. This is available as an individual replacement part. This item is an OEM from Snapper, Murray, and Simplicity for use in lawn mowers, lawn tractors, and snowblowers. It might require a wrench to replace this part. It is made of metal and will need to be replaced if it breaks.

This is an authentic OEM sourced replacement part that has been sourced from the original manufacturer to be used with lawn tractors from Snapper and Simplicity. The metal bushing fits into the front wheel mounting bracket. This item is used to provide spacing between the caster and the bracket assembly. The caster busing is sold individually.

This hex bolt is sourced from the original equipment manufacturer. The bolt is designed to fasten two individual parts together in your lawn and outdoor equipment. It is made of steel to withstand harsh environmental conditions and measures 0.25 inches in diameter and 0.62 inches in length. The hex bolt gets its name from its hexagon-shap...Read moreed head, which makes it easy to grip with a wrench or socket. Before installing the new bolt, first clean the threaded hole where the bolt rests to remove any dirt or debris in the area. Once the area is clean you can place the bolt in position using your hands and tighten it using a wrench or socket. It is important not to overtighten as this could damage the area and the bolt. Sold individually.