8250 - Parts

This is the return hose assembly, or return line, which is designed for various models of airless paint sprayers and is sold as an individual part. The return line is designed to allow paint and pressure to be returned into the reservoir, and simultaneously connected to a specific port on the sprayer for a continuous paint cycle. This ret...Read moreurn line is comprised of a high-quality rubber and metal pump attachment at one end and a metal tube and plastic reservoir attachment at the other end. Depending on your model, you may need a set of pliers or a wrench to disconnect and remove the old line. Before you replace your old line, it is recommended that you wrap the metal end of the line with Teflon tape to create the best seal possible. When replacing the line, disconnect the sprayer from power and release any pressure in the spray gun by squeezing it until no more pressure is felt.

This is genuine OEM sourced part and is specially designed for use with Briggs and Stratton engines commonly installed on lawn and garden equipment. It is an identical replacement for a missing or damaged spring that was originally installed on a new unit. The purpose of this hardware is to apply tension on the exhaust and intake valves. ...Read moreMake sure to refer to the owners manual and the appropriate diagrams of your model for the correct installation of this component. This high-quality spring is made of durable metal and is sold individually. To replace it, you will need to unscrew and remove the cylinder head. This will allow you to take out the valve and replace the spring.

This is an authentic manufacturer-sourced replacement gasket which is specially designed for use with Briggs and Stratton engines commonly installed on lawn and garden equipment. It is generally utilized to provide an air-tight seal for the breather, please make sure to check the appropriate diagrams of your model for the correct applicat...Read moreion of this hardware. Over time it may wear out and begin to fail eventually requiring a replacement.

It is an authentic OEM supplied replacement part that is specially designed for Graco sprayers. This o-ring provides an air tight seal for the pump, please make sure to check appropriate diagrams for correct location and use of this item. Note that one durable rubber o-ring is included per order.

This connecting rod kit is supplied by the original manufacturer for use in paint sprayers. Each kit comes with the rod, pump pin and pump pin lubricant for your convenience. The connecting rod is found within the internal combustion engine of the paint sprayer where it connects the piston to the crankshaft. The connecting rod allows the ...Read morecrankshaft to rotate in order for the engine to run. Over time the rod can become worn down or damaged, causing loss of power and potentially irreparable engine damage. To remove the faulty connecting rod, you will need to disassemble the engine. Disconnect the faulty rod from the piston and the crankshaft, and attach the new one in its place. Ensure that it is properly aligned and reassemble the engine components to complete the repair.

This is a genuine replacement part sourced from the original manufacturer for use with small engines. The special starter rope includes the rope handle and is used to engage the starter pulley to start the engine. This rope kit is available as an individual replacement part, please see model diagram for associative parts.

This is a genuine manufacturer approved part which is specially designed for use with Briggs and Stratton engines commonly installed on Toro lawn and garden equipment. It is an identical replacement for a missing or a faulty grip that was installed on a new unit. The part provides a user with a comfortable grip to pull-start the engine. P...Read morelease make sure to refer to the appropriate diagram of your model for the correct application of this component. Keep in mind this high-quality grip is made of durable plastic and is sold individually.