8086 - Parts

This authentic OEM sourced replacement part is specially designed for use with Murray, Snapper lawn and garden equipment. Ball bearings are generally utilized to reduce the friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces frictio...Read moren. Unfortunately, over time components will wear out and may begin to fail eventually requiring a replacement to maintain peak performance. Keep in mind this high-quality item is made of durable metal and is sold individually.

This gas cap/gauge is an authentic OEM replacement part supplied by the original equipment manufacturer. It is compatible with approximately 150 models of rear engine riders. This part is designed to seal the fuel tank, as well as provide a measurement of the amount of fuel inside. No tools are necessary to replace this part. Simply unscrew the old cap/gauge and replace it with the new one.

This flange nut is designed for use in lawn and garden equipment. It is an OEM replacement part with a diameter of 0.375 inches and a thread pitch of 16 threads per inch. The nut has a ring-shaped extension on one end, known as a flange which helps to evenly distribute the clamping force of the nut and provide a more secure hold. Addition...Read moreally, the flange eliminates the need for separate washers and reduces the risk of abrasion on the surface being fastened. It is normal for the nut to corrode, crack, or for the threads to wear down over time. To replace the flange nut, unthread it from the fastener, and insert and secure the new one using a socket/wrench. Each sold individually.

It is a genuine OEM sourced component which is specially designed for use with Murray and Snapper lawn and garden equipment. The purpose of this part is to provide a tight seal between connected parts, unfortunately, over time the material may wear out and begin to crack eventually requiring a replacement. Keep in mind this high-quality h...Read moreardware is made of durable nylon and is sold individually. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this thrust washer.

This authentic OEM sourced part is made for use with Murray and Snapper riding lawn mowers and garden tractors. It is one of the special pins which are utilized to secure components. If it is damaged or is missing, this will provide an identical replacement for the original component that was installed on a new equipment. This part is a s...Read moretandard hardware which may have multiple applications. Please refer to the appropriate diagrams for your model to ensure the exact location of this roll pin. One durable metal pin is included.

This is an original replacement part manufactured for use with Snapper riding lawn mowers. The woodruff key is used in the gear shaft on the chaincase and fits into the keyway on another part assembly to allow it to rotate with the gear. This woodruff key is available as an individual replacement part.

This hex bolt is sourced from the original equipment manufacturer. The bolt is designed to fasten two individual parts together in your lawn and outdoor equipment. It is made of steel to withstand harsh environmental conditions and measures 0.25 inches in diameter and 0.62 inches in length. The hex bolt gets its name from its hexagon-shap...Read moreed head, which makes it easy to grip with a wrench or socket. Before installing the new bolt, first clean the threaded hole where the bolt rests to remove any dirt or debris in the area. Once the area is clean you can place the bolt in position using your hands and tighten it using a wrench or socket. It is important not to overtighten as this could damage the area and the bolt. Sold individually.

This gas tank cap is an OEM replacement part supplied by Snapper. It is compatible with over 150 models of rear engine riders. This cap provides a cover for the gas tank in the machine. It is designed to prevent the tank from leaking gasoline. This part is made of plastic and sold individually. No tools are needed to replace this part.

This hex center lock nut is sourced from the original manufacturer for use in lawn and garden power equipment. It is a hexagon-shaped fastener for bolts/studs that is responsible for the keeping the bolt/studs secure during use. The nut is made of metal and has a diameter of 5/16 of an inch and a thread pitch of 18 internal threads per in...Read morech. Over time the threads in the nut can wear down and the nut itself may crack or break. It is important to replace it as soon as necessary to avoid damaging your equipment. Use a socket or wrench to remove the old nut and thread the new one on. Make sure to order the correct number of nuts for your equipment as each nut is sold individually.

The replace deck kit is supplied by the original equipment manufacturer for use with Murray and Snapper lawn tractors. It is made of durable materials and is sold individually. A screwdriver may be helpful when replacing this part. It will need to be replaced if it breaks.

This is a genuine Craftsman replacement part that is sourced from the original manufacturer to be used with snowthrowers. The metal hex nut is commonly used to fasten the bolt that secures the height skid to the auger housing. This item is available as an individual replacement part, please note four nuts may be required.

This is an authentic Snapper replacement part that has been sourced from the original manufacturer to be used with riding lawnmowers. The shift handle is used as a lever that changes the gear that the mower is running with. The handle is priced as a single item, please note the knob is separate.