8039 - Parts

This is an authentic Snapper replacement part that has been sourced from the original manufacturer to be used with riding lawnmowers. The metal bolt is used to secure the steering adjustment assembly to the steering support. This item is available as an individual replacement part.

This is a genuine replacement part manufactured for use with outdoor power equipment. The special nut is used with a variety of types of equipment and the application of the nut varies depending on the model of equipment. This nut is available as an individual replacement part, please see model diagram for the nut\'s location and usage.

Keep in mind that this high-quality part is sold individually. The flat idler attaches to the spot idler arm and helps to drive the belt. It will need to be replaced if it becomes broken or stretched. A socket set and a wrench set may be needed when replacing this part. This part is an original part from Murray, Snapper, and Simplicity fo...Read morer use in rear engine rider mowers, rotary mowers, drive tractors, yard cruisers, and lawn tractors.

It is an authentic OEM sourced item which is specially produced for use with snowthrowers, generators, and rear engine riders made by Murray, Briggs & Stratton, Snapper, and Simplicity. The nut is made of metal and attaches to the starter switch. During replacement, it may require a wrench to help install this part correctly. It may becom...Read moree broken or stripped and will need to be replaced. This part is available as an individual replacement.

The retainer attaches to the idler arm support. This genuine item is supplied by the original equipment manufacturer for use with tractors and rear engine riders made by Snapper, Murray, and Simplicity. It is made out of metal and is sold individually. During the installation process, a wrench set might be needed to replace this part. Over time this part may break and will need to be replaced.

Bolt 3/8-16x.75 g5

This is a genuine Snapper replacement part used in compatible lawn tractors. The support cable attaches to the front deck support. You may need a wrench when replacing this item. It is made of metal and will need to be replaced if it breaks. This is available as an individual replacement part.

Lube fitting 3/16 pr

This is an authentic replacement part manufactured for use with Briggs & Stratton small engines. The idle mixture kit is used to adjust the amount of fuel that is sent to the engine's intake while the engine is idling. This idle mixture kit is available as an individual replacement part.

This OEM valve stem regulates air flow in and out of tires, allowing for inflation and deflation. It features an 11.5mm outer diameter, 31.75mm total length, and 22.35mm effective length. It is a metal valve with a threaded plastic cap, housed in plastic. To determine if a valve stem is broken, you can check for signs of damage or leakage...Read more. Signs of a broken valve stem include cracks, bends, or air leakage, which should be replaced to prevent tire deflation and operational issues. To remove the valve stem, fully deflate the tire first. Then, disconnect the tire from the rim to access the inner part of the rim. You may need to unthread any securing nuts if present. Use a pair of pliers to grip at the base of the valve stem and then unscrew it from the rim hole.