8039 - Parts

This replacement ignition key pair is sourced from the original equipment manufacturer. It is specially designed for use with Murray, Snapper, and Simplicity riding lawn mowers and garden tractors. This is a safety feature to prevent any unauthorized use of the mower. The key is inserted into the ignition switch allowing a user to start t...Read morehe unit. Make sure to refer to the owner's manual for your equipment to ensure the correct application. Note, this high-quality metal ignition key is sold in a pack of two.

This is a genuine OEM sourced replacement part that is intended to be used with small engines, generators, snow throwers, blower/vacs, and tillers from Briggs & Stratton, Murray, and Toro. The oil drain plug fits into the oil drain at the bottom of the motor, and is used to allow oil to be drained out of the motor when changing the motor oil. This item is sold as an individual replacement part.

This Fuel Filter is a white plastic part attached within the fuel delivery system between the fuel tank and carburetor. Installation is rated as "Easy" and requires a set of pliers and a screwdriver. If broken, there may be a leak or blockage and the part should be replaced. The part may also need to be replaced according to manufacturer'...Read mores specifications, and is a manufacturer-approved part. Refer to your make, model and diagrams to ensure this part is correct.

This is a genuine replacement part sourced directly from the manufacturer. The screw is commonly found in lawn tractors from Murray and Snapper. This part is made of metal, and may be found in various locations in the machine, depending on model. Please be aware that there are different screws used in the machine. Refer to the parts d...Read moreiagram to be sure of ordering the correct part. You will require a wrench when replacing this item. The screw is sold as an individual replacement part.

Ohms 5/16f

This is an authentic replacement part, sourced from the original manufacturer for use with riding lawnmowers from Snapper and Murray. The durable plastic discharge chute connects to the side of the mower's deck and is used to guide grass clippings as they are discharged from the deck. This item is available as an individual replacement part.

This is an authentic replacement part that has been sourced from the original manufacturer to be used with Briggs & Stratton and Toro lawnmower engines. The metal rod is used to connect the piston and the crankshaft to allow the combustion and pressure to rotate the engine's output. This item is available as an individual replacement part.

This is an original Snapper replacement part manufactured for use with rear engine riding lawnmowers. The special aluminum spacer is used to secure the gage wheel. The spacer is hollow, and supports the bolt that goes through the wheel to secure it to the deck. The spacer is sold individually.

This item is a genuine repair kit that has been sourced from the original manufacturer to be used with Briggs and Stratton engines that are commonly installed on a variety of lawn and garden equipment. Unfortunately, over time parts tend to wear out and they may begin to fail, causing air leaks and poor performance. The kit includes all t...Read morehe recommended parts to replace when repairing your equipment. Make sure to refer to the owner's manual and the parts diagrams for your model to ensure the correct replacement procedure. A screwdriver, a wrench set, and pliers might be needed to replace these components.