8032 Snapper - Parts

This is an original part from Snapper. The #10-32 x 1/4 screw is compatible with many riding lawn tractor engines. The metal screw is often used to secure the switch bracket to the main case weldment. For the repair, you will need a screwdriver. The screw is sold individually.

This is one of the o-rings for the bearing holder, please make sure to check appropriate diagrams for correct location and use of this item. Over time the rubber material may begin to deteriorate and crack eventually requiring replacement. It is a high quality replacement part that is supplied directly from original equipment manufacturer...Read more for use with Snapper lawn mowers. Note this durable o-ring is sold individually.

This 5/16 washer, or toothed washer, is sold individually. It provides a tight fit between the knob and the upper handle on a range of outdoor power equipment. It attaches between the wing knob and the upper handle, and over time and through use, can become damaged and need replacing. It is gold in color and metal, and repairing it is an easy task according to our customers.

Key-ignition indak

This hex center lock nut secures various components of your lawn equipment in place. With a 7/16-inch diameter and 20 threads per inch, it has a hexagonal shape and a locking mechanism that prevents loosening caused by vibrations. It can typically be found on wheel axles or the chain case assembly, depending on the model. A broken lock nu...Read moret may easily come undone and have stripped or fractured threads. Your machine may also excessively vibrate and make noise. Failing to replace a damaged nut can lead to component detachment during operation, posing safety risks to you and others nearby. To replace a nut, consult your user manual to locate it and access it by removing necessary covers and components. Use a socket or wrench to loosen and remove it. Keep in mind that this OEM replacement part is sold individually, so ensure you purchase the correct quantity required for your machine.

This danger decal in your lawn equipment is a warning sticker that reminds users to keep their hands and feet away from certain parts of your machine. Measuring approximately 4 inches in both length and width, it has the message DANGER, KEEP HANDS and FEET AWAY written on it in English. Typically, this decal is placed near the dangerous p...Read morearts of your machine, such as its blades, discharge chute, nozzle, impeller, or dashboard. If the danger decal becomes worn, torn, or difficult to read, you must replace it as soon as possible to prevent accidents from occurring. You must place it in a visible location where the person operating your machine can see it and it needs to be near the part that it is warning them about. This OEM-certified sticker is sold individually.

It is a genuine item that is supplied by the original equipment manufacturer for use with Snapper lawn mowers. This special axle is utilized to secure the rear foot guard. If the component is missing or damaged, this part will provide an identical replacement for the original item that was installed on a new unit. Note, it is made of dura...Read moreble metal and is sold individually. A wrench set will be needed to perform this repair. Check the diagrams for your model to ensure the correct replacement procedure.

This part is priced as an individual replacement even though two may be needed. The flange ball bearing attaches to the front wheel, one on each side. It is made of metal and may require a set of pliers during replacement if this part breaks. This is a genuine Snapper replacement part that is sourced from the original manufacturer for use with rear engine rider mowers.

This genuine manufacturer-sourced replacement part is specially designed for use with Snapper riding lawn mowers. A locknut is a type of nut that resists loosening when properly threaded onto a bolt. This is standard hardware which has multiple applications, please refer to the appropriate diagrams of your model for the correct location a...Read morend use of this part. Keep in mind this durable metal component is sold individually.

This manufacturer-sourced replacement washer is specially produced for use with Murray and Snapper lawn mowers. It helps to distribute the pressure evenly to secure two connected parts. This is a standard hardware which has multiple applications depending on the model of your equipment, please make sure to check appropriate diagrams for ...Read morecorrect location and use of this hardware. This part is made of durable plastic material and it is sold individually.

This is a plastic replacement part made for Snapper and Murray machinery. It is made by the original manufacturer. This type of bearing is used to separate parts to reduce friction and wear on those parts. Therefore, this is a common and easy repair.

This is a genuine Snapper replacement part that is supplied directly from original equipment manufacturer for use on lawn mowers. It is a hi-lift blade that is designed with larger wind wings, they help to increase the airflow and assist in bagging grass clippings. Mower blades can be sharpened several times to extend their life and ensur...Read moree that your grass gets a healthy cut, but they can only be filed so many times before a blade replacement is necessary. This part is made from durable metal and it is sold individually.