Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Top rack not washing, found hole in the rubber boot that connects the manifold at the bottom to the tubes that run up the back which deliver water to the top spinners.
3 of 3 peoplefound this instruction helpful.
Jordan from West Chester, PA
Really Easy
30 - 60 mins
Pliers, Screw drivers
Remove the lower dish rack, and remove the filter and screen. Using a screwdriver, remove the 4 screws that attach the bottom wash arm, and lift off. Remove the retaining screw on the rubber boot. Slide the boot off of the square steel tubes (there is a metal clamp around this connection, you may need to use pliers to open it. The cla
... Read moremp mechanism is a simple latch that you have to push apart from the two tabs). Open the clamp that came with the replacement part and examine the mechanism to see how it needs to be oriented to secure it. Slide the new boot on, close and latch the clamp. Replace the retaining screw, then the main bottom wash arm with it's 4 screws, the replace the screen and filter and bottom rack.