This LG drain hose assembly is a genuine OEM replacement that is compatible with various LG washers. The assembly includes the hose and plastic connectors. The flexible rubber hose transports used water from the washer tub out into a dedicated drainage system such as a laundry sink or standpipe. The drain hose may become clogged, dislodge...Read mored, or damaged by loose items like coins in the laundry or by hard impacts from outside. If the hose is faulty, you will likely notice standing water in the washer tub after a cycle, mold growth, leaking, or water overflow. It is recommended to replace the drain hose promptly if it is faulty to ensure the proper functioning of your washer.
This part is the replacement inlet valve for your dishwasher. It is approximately 4-1/2 inches by 3-1/2 inches. The water inlet valve in your dishwasher connects to the water source and solenoid wires, and ensures the tub has the right amount of water entering it. If your dishwasher continues to fill after it is full, or if it fills slow...Read morely, you may need to replace this valve. Another indication that your valve is damaged and will need to be replaced, is if you notice it is leaking when the dishwasher fills up. Before you begin this repair, be sure to disconnect the water and power sources from your washer. This part is sold individually and is an authentic OEM part.
This mesh filter assembly is a genuine LG replacement part designed for select dishwasher models. Its fine mesh screen captures food particles and debris, preventing clogs in the drain pump and spray arms. By maintaining clear water flow, it helps improve cleaning performance and ensures efficient operation. Made from durable materials, t...Read morehis filter is built to withstand regular use. Installation is simple—remove the old filter and position the new one securely in place.
This installation brackets kit is for installing and securing your dishwasher to the surrounding cabinets or under the countertop to prevent movement or tilting during operation. These silver brackets are usually located at the top or sides of the dishwasher, where they are screwed into the underside of the countertop or the sides of the ...Read morecabinets. If one of these brackets is broken or missing, you may notice your dishwasher shifting or vibrating excessively during use, or it might not sit level. This is a genuine OEM kit.
This drain hose assembly is a replacement fluid-transfer component designed to carry water away efficiently during operation. It supports proper drainage and is commonly replaced when cracked, blocked, or leaking.
This nozzle assembly directs water or fluid accurately to support proper system operation. Controlled flow improves efficiency and consistency. Replacing a worn nozzle restores reliable delivery.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Top rack not washing, found hole in the rubber boot that connects the manifold at the bottom to the tubes that run up the back which deliver water to the top spinners.
3 of 3 peoplefound this instruction helpful.
Jordan from West Chester, PA
Really Easy
30 - 60 mins
Pliers, Screw drivers
Remove the lower dish rack, and remove the filter and screen. Using a screwdriver, remove the 4 screws that attach the bottom wash arm, and lift off. Remove the retaining screw on the rubber boot. Slide the boot off of the square steel tubes (there is a metal clamp around this connection, you may need to use pliers to open it. The cla
... Read moremp mechanism is a simple latch that you have to push apart from the two tabs). Open the clamp that came with the replacement part and examine the mechanism to see how it needs to be oriented to secure it. Slide the new boot on, close and latch the clamp. Replace the retaining screw, then the main bottom wash arm with it's 4 screws, the replace the screen and filter and bottom rack.