EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

79096313402 Kenmore Range - Instructions

All Instructions for the 79096313402
61 - 75 of 117

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Cracked inside glass
0 of 2 people found this instruction helpful.
  • patti from Greer, SC
  • A Bit Difficult
  • 1- 2 hours
  • Screw drivers
I actually watched Youtube while I was changing it. This video was not actually the same make up of my oven, even though the I typed in the model number. I manage to figure it any with the steps anyway. It was harder then I expected but not horrible. I think I did pretty well for a women. Patti
Was this helpful?
Thank you for voting!
Broken globe in oven and burnt out light bulb
0 of 5 people found this instruction helpful.
  • Sharon from Foley, AL
  • Really Easy
  • Less than 15 mins
Easy as 1-2-3
Other Parts Used:
Was this helpful?
Thank you for voting!
aluminum foil melted on oven bottom
  • Allen from wakefield, RI
  • Really Easy
  • Less than 15 mins
  • Screw drivers
It cannot be cleaned as it welded itself to oven bottom. Two screws in back of oven bottom and it lifted right out. The new bottom says "do not use aluminum foil" Very easy repair.
Was this helpful?
Thank you for voting!
Aluminum foil on bottem of oven melted and made a mess on new stove
  • Natalie from Beaverton, OR
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Unscrewed the oven bottom plate and removed. Put new one in place and screwed it in place. Stove looks brand new again and am so happy with the results.The part we received was a perfect match and arrived in a few days!
Was this helpful?
Thank you for voting!
put aluminum foil on bottom panel of oven to catch drips. Big mistake. adhered to oven in minutes.
  • jill from new boston, NH
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Removed 2 screws at rear of bottom panel. Removed old panel, replaced with new and screwed back in.Piece of cake. Plus this company was great to order from. received part the same day. Very happy. Would order through this company again.
Was this helpful?
Thank you for voting!
damaged bottom pan
  • Neal from Severna Park, MD
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Removed 2 back screws, lifted pan from rear and pushed front slightly forward/into oven until front lip cleared. Installed new pan in reverse order.
Was this helpful?
Thank you for voting!
lost a rack?
  • Melanie from Reading, PA
  • Really Easy
  • Less than 15 mins
After removing an oven rack to make room for the thanksgiving turkey roaster, I have NO IDEA, where I might have stowed it away! After searching every cabinet and every closet I realized I needed to do something quick for our annual christmas cookie marathon that would begin on Sunday. It was so easy to order the part, it arrived the next day, and we baked for 5 hours using the 3 racks in the convection oven. Dozens of cookies later... Thank you Parts Select!
Was this helpful?
Thank you for voting!
When turning the switch on for the large eye I could hear an electrical short behind the switch.
  • Kent from McHenry, MS
  • Really Easy
  • Less than 15 mins
  • Nutdriver, Screw drivers
Initially we realized there was a problem while cooking with the large eyes and we began hearing an electrical short behind the control switch. I unplugged the power from the oven/cooktop and removed the back panel where I could visually see soot on the switches where it was shorted. Careful while choosing your part from the diagram on P artselect.com. For the model FEF336ECJ, atleast for my oven, the eye switches were reversed and I ordered the small eye's switches! Luckily they have an outstanding customer support and immediately mailed out the new parts and a label to send the wrong parts back. Changing the parts out was very simple. Pull the oven out and UNPLUG IT from any electrical outlet. Remove the back panel. Double check from the label on the front of the control panel that you are working with the correct switch, and before removing the current switch, remove the wires one by one and place them on the new part to make sure you don't misplace these wires. Once the wires are connected to the new part, pull the plastic knob off of the old switch to reveal the screws on front of the panel. Place the new switch where the old one came from and fasten the screws back in place. Replace the knob, replace the back panel(for safety) and test the new switch before you push the oven back into place. If you can turn a screw driver, move the oven, and unplug the power, this easy do it yourself repair will save you possibly hundreds by not calling a repair/handyman who would absolutely love you to pay out the nose for such an easy task.
Was this helpful?
Thank you for voting!
really bad ugly streaks inside of glass
  • John from Hemet, CA
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
open door,throw the door latches at the hinges and remove door. Take the out of the outer panel so you can separate the glasses. remove clip that hold the outer glass in place. I ordered a replacement glass as I never thought that it would come clean it looked so bad, but it cleaned up like new so I now have a spare glass for my oven door . Just reverse the way you take it apart to put it back together.
Was this helpful?
Thank you for voting!
inner glass uncleanable
  • Krista from Newtown, CT
  • Easy
  • 15 - 30 mins
  • Screw drivers
Took door apart, went online to partselect, ordered new glass, and put it back together. Oven looks like new. Makes sense to order the isolation as well when you do the repair
Was this helpful?
Thank you for voting!
broiler element burned out.
  • Kellyjean from Springfield, MA
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Unscrewed the old element (2) screws, then unscrewed the (2) brackets holding the element up, pulled the element out of the back wall of the oven unhooked the (2) electrical wires and left them hanging. Installation is in the exact reverse order.
Was this helpful?
Thank you for voting!
oven would turn on and stay on regardless of set point
  • robert from Mansfield, MA
  • Really Easy
  • 15 - 30 mins
  • Nutdriver
Pulled oven from counter space unplugged unit unscrewed 9 - 1/4" tech screws then one more 1/4" tech screw that holds the sensor.Inserted the new element cut the two wire because it was a different connection stripped the wires and did the same to the old element but used the old plug.Connected the plug,plugged the over back in slid the u nit back and turned out on for a test.All is well,thank you!
Was this helpful?
Thank you for voting!
Broiler element broken
  • Robert from Newark, DE
  • Easy
  • 15 - 30 mins
  • Screw drivers
Removed broken element, four screws. Element ends were attached to the oven via wire clips. Removed those too. Placed clips on the ends of the new element and remounted to the top of the oven enclosure with the fours screens. Took twenty to twenty five minutes. We had Tbones a little while later. Saved over 125.00 for repairman.
Was this helpful?
Thank you for voting!
I had placed aluminum foil on bottom and it adhered to the surface.
  • Marilyn from Logansport, IN
  • Really Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
I removed two screws and lifted out the ruined bottom. I set the new bottom in, but could not get the screws lined up so left them out. The bottom is heavy enough, it is not going anywhere. I am very grateful the part was available.
Was this helpful?
Thank you for voting!
Temperature not correct.
  • David C from Huntington Beach, CA
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Pliers
Pull out stove. Unplug power. Remove four screws on each corner and loosen one screw in the middle. Remove back panel. Locate and unplug sensor connector. Remove one screw from sensor plate. Turn the sensor 45 degrees and pull sensor out from the rear. Connector received had the incorrect plug and terminals so it was necessaary to sp lice the connector from the one removed to the one received. Cut and splice wires as necessary. Install sensor, install back panel, plug in electrical power, push stove back into position. I used a temperature gauge to check temperature after stove was in position. In my case the temperature had to be adjusted which is a keyboard function on this unit.
Was this helpful?
Thank you for voting!
All Instructions for the 79096313402
61 - 75 of 117