My Orders
- Home
- 790403419810
- Instructions
790403419810 Kenmore Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Igniter failing to energize even though there was 120 volts being supplied.
1 person
found this instruction helpful.
-
Richard from MERCERVILLE, NJ
- Very Easy
- Less than 15 mins
-
Nutdriver
Slide Range away from wall, unplug Range, remove rear cover (4) screws, removed burner assembly (5) screws, unplugged Igniter connector, loosen Igniter bracket, remove Igniter (2) screws. Reverse process to install new Igniter. I also wore latex gloves to prevent touching graphite portion of Igniter. Tested Broiler for operation, slid Ran
... Read more
ge back into position. All good.
Read less
Was this helpful?
Thank you for voting!
Replace igniter
1 person
found this instruction helpful.
-
Edward from NORWOOD, PA
- Really Easy
- 15 - 30 mins
New part needed to be spliced to old connector with porcelain wire nuts then removed lower oven drawer to access the connection for igniter
Was this helpful?
Thank you for voting!
The screw head was stripped and couldn't be extracted with a Phillips head screwdriver
1 of 5 people
found this instruction helpful.
-
Robert from GLEN BURNIE, MD
- Very Easy
- Less than 15 mins
-
Screw drivers
If you do not intend to take apart the oven door to clean the interior glass, I would recommend you use a clamp to hold the handle and oven door tightly together while you replace the screw. There is a spacer between the back and front panels which could otherwise be shifted out of position. I used a screw extractor to remove the damage
... Read more
d screw and then installed the replacement. Wish all appliance repairs were this easy!
Read less
Was this helpful?
Thank you for voting!