My Orders
- Home
- 79032623316
- Instructions
79032623316 Kenmore Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Stove pilot not clicking on any burner, oven works fine
15 of 22 people
found this instruction helpful.
-
Colin from MORGANTOWN, WV
- Easy
- 15 - 30 mins
-
Nutdriver, Pliers
Unplug the range. Remove screw to Take of the back panel on upper right corner. Unclip the old spark module, unplug the wires with the needle nose pliers and plug them into the new spark module same as the old module. Clip it on. Replace the back panel.
Was this helpful?
Thank you for voting!
Replace oven gas safety valve.
5 of 6 people
found this instruction helpful.
-
Hans from JERUSALEM, AR
- A Bit Difficult
- 1- 2 hours
-
Nutdriver, Pliers, Screw drivers, Wrench set
It went really well until test when the flame was reaching up into the oven itself, not good. Much research finally found an older repairman who informed me the nozzle that injects the gas into the oven burner had to be fully screwed down for LP Gas. The unit is pre-set for Natural Gas. Tightened it all the way down and everything work
... Read more
s just fine. We live rurally so use Liquid Propane Gas, not Natural Gas.
Read less
Was this helpful?
Thank you for voting!