66512776K310 Whirlpool Dishwasher - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
The wheel guides on the top rack broke off
I found the schematic for my rack that detailed out the entire rack assembly so I was able to identify the sub assembly part that I could use to fix/keep my current rack. It was a snap in part. Pliers helped remove the old part, but not required for reassembly.
Parts Used:
-
Debora from Los Altos, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers
Was this instruction helpful to you?
Thank you for voting!
Prongs holding wheel to upper rack trolly assembly broken.
Printed the expolded diagram for the upper rack asembly when I ordered the part and retained to use as a reference for replacing the rack adjuster. Part arrived within three days or ordering. Used screwdriver to remove clips holding broken adjuster in place and referenced the diagram to attach the new adjuster to the rack. From start to finish was no more than 10 minutes.
Parts Used:
-
Alan from Webster Groves, MO
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
wheels seperated from attachment on top rack
pop off old wheel attachment. There were three snap pieces holding it on. Then snap back on. Really easy to see how it is secured
Parts Used:
-
Glenn from Seminole, FL
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Rollers on rack adjusters, both sides
Just used a screwdriver to pry off the fastening clips -- removed adjuster from main assy and install new one, then installed clips back on. Very easy project
Parts Used:
-
James from Dubuque, IA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Axle on the left side adjuster broke due to age or use, I guess.
Remove the top rack. Simply pry the three retainers loose,replace adjuster and retainers. Slide top rack into place. Incredible service. Ordered part Thursday morning& it arrived before noon the next day.
Parts Used:
-
Dale from Reno, NV
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Roller on adjuster on upper rack was broken
Ordered replacement adjuster, removed the old one, and installed the new one. Just have to be sure to re-attach new one in the same place as the old one. Very simple repair.
Parts Used:
-
Michael from Lisle, IL
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Roller on left rack adjuster broke
Used screw driver to remove brackets on the adjuster. installed new part by snapping back into place. Great customer service from PartSelect. Ordered part on Monday morning and received it after lunch next day.
Parts Used:
-
Dan from Vero Beach, FL
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Both Rack Adjuster rollers broken.
Unsnapped both racks and replaced with both sides.
Parts Used:
-
Juan from Chula Vista, CA
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Replace rack adjuster, wheel was broken.
There were 3 clamps that secure the rack adjuster to the rack. I only had to replace one side so I had the opposite side in tact to view the location of the clamps. All 3 clamps snapped in place. It was a very easy fix. 5 minutes.
Parts Used:
-
David from Herndon, PA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
The wheels broke off the melted plastic parts and top rack was not able to go in or out
I had to figure it out. No instructions are given with parts.
Parts Used:
-
Kasandra from West Long Branch, NJ
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Broken upper rack roller
-
Dianne from Hollis, NH
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
Was this instruction helpful to you?
Thank you for voting!
The wheels were broken off the rack
It was a simple snap it apart, put it back together using the new parts. Very simple. A small screw driver was used to help pry the snap together parts apart. No tools needed for reassembly.
Parts Used:
-
Jack from Meadowlakes, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Would not start
Very easy if you are mechanically inclined
Parts Used:
-
Steven R from Heltonville, IN
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
wheel on top rack broke
Really was repair. Pulled rack out of glides unclipped the broken rack adjustor, clipped in new one, using opposite side as a guide for the clips
Parts Used:
-
Brian from newport coast, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Bbroken wheel in top dishrack
Very easy to repair. Took off two supporting clips, opened up the shelf adjuster and replaced part. Be careful prying open the adjuster
Parts Used:
-
Steve from Waukesha, WI
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!