66512776K310 Whirlpool Dishwasher - Instructions

Since I replaced both right and left sides, I simply took one apart and re-assembled it to match the other side. I honestly took about 5 minutes to do both sides. Parts fit great, exactly the same as the OEM original and I probably saved $75.00 in repair billing from a serviceman.

Ordered one evening and it arrived in two days. It took a minute to understand how it was attached to the basket with three clips. Two on the sides and one in the middle. All need to be taken off and the one in the middle has another assembly that needs to be opened up to allow the old one to come out and the new one to go in. Perfect fit and the hardest part was taking it out of the wrapper.

Replaced the adjuster

I figured out what was causing the problem and pulled the part number up on your parts list. The actual part had 3 different part numbers on so I reviewed all numbers. Your program had diagrams so it was easy to figure out which part I needed ~ thank you! I ordered the part and it came in 2 days ~ wow! As soon as I got it I installed it and I promise if tool less than 5 minutes to install! I had a quote of $75 diagnosis fee + parts and labor to repair. For $30.81 I fixed it myself AND I'm a female with NO experience! It was wonderful! Thank you soooooo much:)

We did exactly what another customer told us to do. I ordered the part, which came extremely fast. We carefully snapped off the pieces on the rack, sometimes using a small screwdriver. The most difficult part was getting the rack adjuster to slide into the part. We used the other side as a guide to put it back together. We problably saved $200 in service calls by doing it ourselves. I ordered 2 just incase the other one breaks also - it is kind of loose. Shame on Kitchenaid for not making a better product!!!

I read the other fellow's report and was sceptical of replacing this part, that quickly, without breaking any of the other plastic pieces involved in the process. Decided to try it and only ordered the one necessary part (which came in two days). I was able to detach and reuse all surrounding plastic hardware while installing the new rack adjuster (~$24), and did it all with just one small-sized screwdriver. It was less than 15 minutes as the other fellow said.

The repair was very easy. I was able to quickly replace the broken part.

poped of the old poped on the new

The top rack in my dishwasher are on rollers and one of the wheel will not stay in place, By looking at the device that keep the wheel in place was broken and I have to order the side section because the device that hold the wheel in place is the side section, It took about 10 min to replace the part, so I have order two, and used one, and will keep the other just in case it will happen again, i will have one on hand, to keep my wife happy

Very easy to repair. Didn't have instructions, but not sure I needed more paper. I just copied the assembly of the other side of the rack that was not broken. Part came fast and was quick to put in.

I gave the upper rack and parts to my husband. He gently pried the old one off and clipped the new back on. The hardest part was being gentle enough not to break anything more.

replaced rack adjuster by removing rack from the dishwasher and then prying the old adjust off and replacing with the new.

I unsnapped the old adjuster and by looking at the one on the other side, I was able to just snap the new one in place. A huge repair savings and most importantly, I'm proud of myself!!

The repair was simple and self explanatory. The new adjusters were installed in the same way that the old ones had been.

I found the schematic for my rack that detailed out the entire rack assembly so I was able to identify the sub assembly part that I could use to fix/keep my current rack. It was a snap in part. Pliers helped remove the old part, but not required for reassembly.