65021 - Parts

This is a genuine replacement part that has been sourced from the original manufacturer to be used with walk-behind lawnmowers. The metal drive pulley attaches to the transmission drive shaft and is used to link the drive belt. This item is available as an individual replacement part, please see model diagram for associative parts.

This is an original part from Husqvarna and Jonsered for use with Lawn Mowers. The ground drive belt drives the transmission, which propels the lawn mower wheels. The most common reason for replacing the drive belt is when the engine is running but the mower will not self-propel. This part is sold individually. The tools that you will need to replace the drive belt is a 12mm socket and a 12mm wrench, T-40 Torx bit.

This lift pivot bearing is an OEM part from Craftsman for lawn tractors. This part connects in the middle of the link arm and the suspension arm to allow even movement when operating the lift. It is recommended to review your models diagram to verify the parts compatibility. This part is made of metal and sold individually.

This authentic item is supplied directly from the original equipment manufacturer for use with Poulan and Husqvarna riding lawn mowers and garden tractors. It is a special part that helps to lift the equipment. This provides an identical replacement for a missing or a faulty left-hand lift link that was installed on a new unit, please mak...Read moree sure to check the appropriate diagrams of your model for the correct location and application of this part. This high-quality component is made of durable metal and is sold individually, keep in mind the hardware to secure it and the right-hand side link are all sold separately.

This is an authentic Husqvarna replacement part, sourced from the original manufacturer for use with walk-behind lawnmowers. The special control bar is commonly used to actuate the lawnmower's control cable. This special control bar is available as an individual replacement part, please see model diagram for associative parts.

This is an original MTD replacement part. The carriage screw is designed by the manufacturer for use in snowblowers and snow throwers. This part is made of metal, and is generally used to help secure the upper chute to the lower chute. Please be aware that there are different screws used in the machine. Refer to the parts diagram to b...Read moree sure of ordering the correct part. You may require a wrench when replacing this item. This part is sold individually.

This is an Authentic OEM part for use with Poulan, WeedEater, and Husqvarna Lawn Mowers. The starter rope guide kit attaches the engine starter rope to the lawn mower handle for easy access when starting the engine. This part includes the T-knob and the rope guide the starter rope is not included. There are no tools needed to replace this part.

This is a genuine manufacturer approved replacement spark plug. It is an authentic OEM part commonly used on a variety of lawn and garden equipment. The purpose of a spark plug is to deliver electricity from an ignition system to the combustion chamber. Over time spark plugs tend to wear out, get dirty or fouled requiring replacement. Inc...Read moreludes one (1) spark plug per order. You would need a spark plug wrench or a socket wrench to install the spark plug. Please note, after replacing it, you should gap the spark plug according to the owners manual of the outdoor product you have.

This genuine OEM hex nut is a high-quality replacement part designed for use with riding lawn mowers and garden tractors. Unlike aftermarket alternatives, this part is sourced directly from the original equipment manufacturer to ensure a precise fit and reliable performance. As a standard hardware component, it may serve multiple funct...Read moreions depending on your specific model. Note: Be sure to consult your equipment’s diagram to confirm the correct location and application. This item is sold individually.