Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
needed new grease filter
0 of 1 peoplefound this instruction helpful.
Mary from Anna Maria, FL
Really Easy
Less than 15 mins
Removed old grease filter,replaced with new grease filter. No tools needed. I ordered the grease filter on Tuesday and it arrived at my door on Wed. Best experience ever ordering a part, I will definitely use Part Select again and have already recommended it to friends.
Was this helpful?
Thank you for voting!
control switch was no good
0 of 1 peoplefound this instruction helpful.
Valentine from Bow, NH
Really Easy
Less than 15 mins
Screw drivers
I remove fore screwsfrom the front panel. Then remove two screws to remove the switch and removed the wire plugs then put everything back together again.
Was this helpful?
Thank you for voting!
Filter Worn Out
1 of 4 peoplefound this instruction helpful.
Thomas from Berlin, MD
Really Easy
Less than 15 mins
Remove cover and install
Was this helpful?
Thank you for voting!
electric element would not function
0 of 1 peoplefound this instruction helpful.
david from castle rock, CO
Really Easy
Less than 15 mins
Nutdriver, Pliers, Screw drivers
2 screws to remove disconnect 220 v power use long nose pliers to transfer 5 female spade terminals use nut driver to r@r shaft nut replace panel with 2 screws Turn on power and test!---OK!
Was this helpful?
Thank you for voting!
Sparks shot out from under knob, then, no surprise, the burner didn't work
0 of 1 peoplefound this instruction helpful.
Charles from Bourbon, MO
Easy
Less than 15 mins
I've ordered parts from you twice now, and both times the service has been absolutely amazing!!!!!
Now, on to how I did this without fire or electrocution:
Turned off breakers. Grabbed a beer. Removed two screws holding in plate. Removed electrical connectors. Removed two screws holding switch.
... Read morer />Put new switch in place with screws. Reattached connectors. Reseated plate & screws. Turned on power & tested. Finished beer and felt very manly.
The hardest part was getting the plate to re-seat.
Read less
Was this helpful?
Thank you for voting!
Infinite Rotary Control Failed
0 of 1 peoplefound this instruction helpful.
George from Centreville, VA
Easy
Less than 15 mins
Screw drivers
Replaced one of the four burner control switches on my Jennair cooktop. One of the tricks I use to prevent mistakes is putting the new switch along side the existing one and swap one connector at a time over to the new switch preventing any confusion and negating any need to mark the wires. This differs from your video assistant who disco
... Read morennected all the wires at once. gc.
Read less
Was this helpful?
Thank you for voting!
damaged grill grate
1 of 4 peoplefound this instruction helpful.
Elaine from N.Eastham, MA
Really Easy
Less than 15 mins
Not much to tell about installing a new grill grate. Partselct.com was very prompt and efficient in sending out the part.
Was this helpful?
Thank you for voting!
Had to replace grease filter
1 of 4 peoplefound this instruction helpful.
Donald from Cottage Grove, OR
Really Easy
Less than 15 mins
Nice filter. Exact fit. Had a little ring to use to pull out to clean. Shipment was packed well.
Was this helpful?
Thank you for voting!
could not adj. temp. stayed high all the time
0 of 1 peoplefound this instruction helpful.
Don from CARROLLTON, TX
Really Easy
15 - 30 mins
Screw drivers
replaced stove top switch
Was this helpful?
Thank you for voting!
Switch inoperative
0 of 1 peoplefound this instruction helpful.
Rex from Schaumburg, IL
Really Easy
15 - 30 mins
Screw drivers
Remove cover plate, install new switch, replace cover place. Replace one wire at a time, a pair of needle nose pliers may be helpful. Surprise of this job was that I had a torque screw driver (I think that's what it's called) to remove the switch from the cover plate. These are the screws you'll see after removing the knob. Find that driv
... Read moreer before you begin, mine was in the garage and for the life of me, I can't remember why I ever had one in the first place. Thanks for a great web site!
Read less
Was this helpful?
Thank you for voting!
worn out / burned grill and components
2 of 7 peoplefound this instruction helpful.
Brian from Lafayette, LA
Really Easy
Less than 15 mins
very easy - not really a "repair" more of a face lift, although the grill was unusable.
It was hard. I simply replaced the old one!! fIT PERFECTLY. :-)
Was this helpful?
Thank you for voting!
range handle fell off and screw got lost
1 of 4 peoplefound this instruction helpful.
Frances from palm beach gardens, FL
Really Easy
15 - 30 mins
Screw drivers
It was worth the money for that little screw, since I didn't have to run all over trying to find the right one.
Was this helpful?
Thank you for voting!
Electric barbecue element not heating
0 of 1 peoplefound this instruction helpful.
S.. J. from Punta Gorda, FL
Really Easy
15 - 30 mins
Pliers, Screw drivers
1. Diagnosed problem = switch at fault not element Made a diagram of wire positions on faulty switch 2. Ordered part = remarkable service! Switch arrived in less than 24 hours 3.Installed new switch 4. Tested appliance = success! 5. Saved $150 and a lot of aggravation Terrific site. Excellent help in figu
... Read morering out and solving the problem. Two thumbs up!
Read less
Was this helpful?
Thank you for voting!
back burn would turn high no mater where you set the control knob.
0 of 1 peoplefound this instruction helpful.
William from Valley Grande, AL
Easy
15 - 30 mins
Pliers, Screw drivers
Well I was just guessing the controll switch was bad so I ordered a new one. So I cut off the power and held the switch close to the old one and changed the wires one at a time matching the connection terminals and cut the power back on and presto it WORKED..The service man wanted to charge me 65.00 dollars just to check it out. I
... Read more figure I saved about 100.00 dollers plus I learned something.
My Orders
