My Orders
613H - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Mistreated Briggs & Stratton 206 CC Engine on MTD Chipper
10 of 14 people
found this instruction helpful.
-
Dana from HAMMOND, IN
- A Bit Difficult
- 1- 2 hours
-
Nutdriver, Pliers, Screw drivers, Socket set
Removed tank and drained old gas.
Removed and disassembled carb. Needed new gaskets and seals, and had to clean corn syrup glaze (separated ethanol) from bowl and everywhere else with carb cleaner.
Throttle linkage was de-plating/rusty. Steel wool and WD40 got it moving again.
Cleaned spark plug electrode.
Reassemble ... Read more d, poured Sea Foam in the bottom of the tank and gave it a few pulls.
Let Sea Foam sit for a while, then filled the tank with Premium.
Blew white smoke for a minute then ran like new. Shredded for a while, then changed the oil.
Removed and disassembled carb. Needed new gaskets and seals, and had to clean corn syrup glaze (separated ethanol) from bowl and everywhere else with carb cleaner.
Throttle linkage was de-plating/rusty. Steel wool and WD40 got it moving again.
Cleaned spark plug electrode.
Reassemble ... Read more d, poured Sea Foam in the bottom of the tank and gave it a few pulls.
Let Sea Foam sit for a while, then filled the tank with Premium.
Blew white smoke for a minute then ran like new. Shredded for a while, then changed the oil.
Read less
Was this helpful?
Thank you for voting!
Heat was escaping from my oven and really heating up my house
5 of 8 people
found this instruction helpful.
-
Patricia from Sanger, TX
- Really Easy
- Less than 15 mins
The heat sealing strips are elastic type material with hooks on each end. I simply removed the old strips and hooked the new ones in place.
It was easier than I ever dreamed possible!
And my kitchen is now nice and cool.
Pat Morrison
Sanger TX
It was easier than I ever dreamed possible!
And my kitchen is now nice and cool.
Pat Morrison
Sanger TX
Was this helpful?
Thank you for voting!
A seal came off the oven
3 of 5 people
found this instruction helpful.
-
andrea from new york, NY
- Really Easy
- Less than 15 mins
I found the model, ordered the new seal, it arrived very quickly via mail and I replaced the seal. You simply slid off the old, slid on the new one and hooked it in place. No expensive repairman!
Was this helpful?
Thank you for voting!
needed to replace a side oven door seal
3 of 7 people
found this instruction helpful.
-
Robert from Lebanon, NH
- Easy
- Less than 15 mins
The trickiest part was making sure that the correct part was ordered. The first attempt was a failure. The seal was too long and the clips were too big.
After finding the correct part it was a breeze.
After finding the correct part it was a breeze.
Was this helpful?
Thank you for voting!
Door gasket broken
-
Tim from North Hills, CA
- Really Easy
- Less than 15 mins
This part showed up so fast I couldn't believe it. Took longer to unwrap the package than to install the gasket.
Was this helpful?
Thank you for voting!