6078 - Parts

This is a genuine 6 Oz. tube of grease that us supplied directly from original tool manufacturer for use with Milwaukee power tools. This petroleum based grease helps to lubricate the system allowing internal components to move with minimum friction. Keeping your tool lubricated can greatly increase the life and performance of the tool. Please note this high quality item is sold individually.

This is an authentic Milwaukee replacement part manufactured for use with power tools such as angle grinders and sawzalls. The retaining ring is typically used to secure a bearing to a spindle shaft often near a rotary gear. This internal retaining ring is sold as an individual replacement part.

It is a genuine part that is supplied directly from the original equipment manufacturer for use with Milwaukee power tools. This is an identical replacement for a missing or faulty brush holder spring that was installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the correct location and applicat...Read moreion of this hardware. Keep in mind this high-quality item is made of durable metal and is sold individually.

This is an OEM part sourced directly from the manufacturer and used in grinders, sanders, and polishers made by Milwaukee. The spindle lock assembly connects to the flat washer and the gear case. It may require a wrench during installation and will require replacing if it breaks or becomes stripped. This part is priced individually and is made of metal.

This is a manufacturer sourced replacement switch used on Milwaukee polishers/grinders. It is the part of the tool handling on/off operations. Because switches have mechanical parts, they will tend to wear out over time, eventually requiring replacement. Switch has a plastic body and it is sold individually. To replace this switch you wo...Read moreuld need a torx screwdriver. • Remove screws used to hold two pieces of housing set together • Disconnect wires from the old switch and remove it from the housing • Place the new switch in the housing and connect wires to it • Reassemble the housing

This is an authentic manufacturer sourced replacement assembly designed for use with Milwaukee power tools. This part holds carbon brush around the armature to provide stable and safe contact. It is made out of plastic with metal and it is sold individually. Please note carbon brushes are sold separately. To replace this assembly you wou...Read moreld need a screwdriver and pliers. • First remove screws holding the cover together • Carefully remove two halves of the housing to gain access to armature and brush holder • Remove the screws holding brush holder to the trigger • Remove the armature assembly and the brush holder • Install the new brush holder, brushes and the armature • Reassemble and test your tool

This part is available as an individual replacement. The blade housing is made out of plastic and metal. When replacing this item a set of pliers may be needed. It will need to be replaced if it becomes broken. This is an authentic Milwaukee replacement part that is sourced from the original manufacturer for use with grinders, polishers, and sanders.

This is a genuine Milwaukee replacement part, sourced directly from the manufacturer. The fan is found in a variety of Milwaukee power tools such as grinders and hammers. It is used to blow air over the armature to cool it as it spins. This part is made of high-quality plastic. You will require a screwdriver to replace this item. It ...Read moreis advisable when removing multiple parts to keep careful track of their order so they can be reassembled correctly. This item is sold individually.

This is an OEM part sourced directly from the manufacturer. The rubber bumper protects surfaces from scratching and normal wear and tear. Grinders, sanders and jigsaws are common tools that require this part. This part is sold separately. No tools are required to install this part, simply push into place.