6078 - Overview

Genuine Milwaukee replacement part. Includes 1 Carbon Brush with wire lead, brush spring and bracket attached. ? Worn brushes frequently are the cause behind a motor running poorly. ? Replacing brushes can fix a motor that's operating intermittently. ? New brushes can restore a motor's electric braking. Carbon brushes are one...Read more of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.

This authentic replacement part is designed for use with Milwaukee drills/drivers. Ball bearings are used to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. Bearings experience constant wear from pressure, heat,...Read more vibration and friction. Because of this, many bearings need to be periodically replaced. This part is made out of metal and it is sold individually.

Genuine Milwaukee replacement part, it is sold individually. The 06-82-8864 screw is used in various places as a fastener. Commonly used in power tools, it is compatible with the models listed below. A Torx or flat head screwdriver is needed to properly tighten this screw.

This rubber, injection-molded handle is an authentic Milwaukee replacement part. It is used in a many power tools including sanders, nibblers, and polishers. This ergonomic side handle simply twists into/out of place with no tools required. For improved comfort, it can be moved to different locations on a tool easily and quickly. Sold individually.

This spiral bevel pinion is the original part manufactured from Milwaukee. It is constructed of high-quality metal, and is compatible with several sanders and grinders. This part is most often, fastened between the hex jam nut and ball bearing within the sander housing. The spiral bevel pinion is used to transfer power to the spindle. A s...Read morecrewdriver is required to replace this item. It is advisable when removing multiple parts to keep careful track of their order so they can be reassembled correctly. This part is sold individually.

This replacement brush tube is an specially manufactured for use with a variety of Milwaukee power tools. It is a genuine OEM part, not an aftermarket equivalent. This part is used to secure the carbon brush that is sold separately. It is made out of metal and it is sold individually. To complete this repair you will need a screwdriver ...Read moreand pliers. • First make sure the tool is unplugged • Remove the housing • Remove the carbon brush • Disconnect the wires • Remove the old tube • Install the new brush holder • Reassemble and test your tool

This is a genuine Milwaukee replacement part, it is sold individually. This Brush Retaining Screw (Brush Cap) is used on the model numbers shown below. The purpose of this part is to secure the brushes in the brush holder To remove this part ,simply use a flat head screw driver. Don't use too much pressure on it, they do have a tendency to break.

It is an authentic manufacturer-supplied item that is specially made for use with Milwaukee sanders and grinders. This is an identical replacement for a missing or a faulty shoulder screw that was installed on a new unit, please make sure to check the appropriate diagrams of your model for the correct location and application of this hard...Read moreware. Keep in mind this high-quality screw is made of durable metal and is sold individually.

This part is provided by the original manufacturer for Milwaukee power tools. The metal bearing is used to prevent friction between moving parts, and usually goes inside a gear. The item includes one needle bearing, and please be aware any associated parts are sold separately. Please refer to your models parts diagram for any additional parts.

This is an authentic replacement part manufactured for use with Milwaukee grinders, sanders, and polishers. This special washer provides spacing on the spindle shaft for the hub adapter. The spindle washer is sold individually.

This Milwaukee Quik-Lok-« cord is a genuine Milwaukee replacement part, it is sold individually.This is a two 8 foot cord for fast field replacement of a damaged cord.Made of premium grade Hi-Flex wire the cord is quickly removed and attached to Milwaukee tools with the Quik-Lok-« cord feature.To change a damaged cord simply turn the coll...Read morear at the top of the cord counter clockwise to loosen the nut and pull down on the cord to remove.To re-attach a new cord, line up the pins in the end of the tool with the pin receptacles in the end of the cord, push together and turn the collar clockwise to lock in place.