My Orders
6021F Husqvarna Lawn Mower - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Rear drive wheels bald, no traction
3 of 5 people
found this instruction helpful.
-
Mark from COLUMBUS, OH
- Very Easy
- Less than 15 mins
-
Socket set
9/16s inch socket, something to prop up one side of the mower (I used a plastic plant pot), and about 5 minutes was all that was needed. Undo the nut on the wheel, remove, replace it with the new one (can't mess it up - just goes on one way which is extremely obvious), replace and tighten the nut -- done. Just that simple. With the new
... Read more
kicks it goes up hill like a champ now (instead of spinning, especially with the grass catcher attached).
Read less
Was this helpful?
Thank you for voting!
Wheels on this old mower were plastic and brittle and over the years broke off in pieces
1 person
found this instruction helpful.
-
Mike from GREENFIELD, MO
- Really Easy
- Less than 15 mins
-
Socket set
Can't believe you all had replacement wheels for this dinosaur. They have drive gears attached to wheel. Very simple to fix but broke old exhaust chute on mower when I leaned it on its side. Now I have to find a replacement for it! Geeesh!!!
Was this helpful?
Thank you for voting!
Front drive wheel locked up, causing the mower to not be able to be pushed.
4 of 12 people
found this instruction helpful.
-
Walter from EVERETT, WA
- Easy
- Less than 15 mins
-
Socket set
Removed wheel by pressing off the plastic hub cap exposing the nut holding the wheel. I removed the nut, then pulled the wheel straight off the axel shaft. This exposed the broken dust cover. I they wiggled the dust cover off, cleaned the dirt from inside the wheel, placed the new dust cover, replaced the wheel, nut and hub cap.
Was this helpful?
Thank you for voting!