6021F Husqvarna Lawn Mower - Overview

The Dust Shield is a 6-3/4 inch, black plastic part, used to prevent dust or debris fouling the wheel or axle. It attaches inside of the wheel around the axle. Installation is rated as "Easy" and will require a wrench. If broken, damaged, or worn due to fatigue, you will see visable damage and you may have debris getting caught in the axl...Read moree. If broken, replace it. Refer to your make, model and diagram to make sure you're choosing the right part. This part comes individually sold.

Introducing the Husqvarna Engine Zone Control Cable, a vital component for your Husqvarna machines. This Snap-in Control Cable ensures your Husqvarna equipment performs at its peak, providing you the reliability and efficiency you expect from this renowned brand. Harness the power of improved control and superb functionality with this cab...Read morele. Designed for longevity and durability, this cable guarantees top-notch performance. Boost the functionality of your Husqvarna machine today with this Engine Zone Control cable. Experience the ultimate in control and precision with Husqvarna.

This Handle Bolt is sourced directly from the original equipment manufacturer for use in various lawn and garden equipment. It is used to secure the upper and lower handles together and is tightened by a knob on the other end. It is made of metal, is black, and is sold individually, not as part of a kit or assembly. This part will need ...Read moreto be replaced when it is worn or damaged and can no longer secure the arms together. No tools are needed to complete this repair. Customers rated this repair as Easy.

The is a genuine OEM part. The rear wheel & tire assembly is compatible with many Husqvarna lawn mowers. This component is fitted on the shaft assembly, between the washer and the flangelock hex nut. The rear wheel constructed of durable plastic and rubber. A socket set is required for making the replacement.

Discover the power of a pristine cut with the Husqvarna lawn mower mulching blade, designed exclusively for mowers with a generous 21-inch deck. This manufacturer-approved blade doesn't just cut your grass - it expertly rotates under the mower deck for a clean, professional finish. Please prioritize safety during installation by wearing w...Read moreork gloves to protect your hands. To ensure a straightforward installation process, we offer an easy-to-follow video guide for your convenience. Experience the incomparable quality and performance of Husqvarna with this supreme mulching blade.

Made of high-quality metal, this hex flange locknut is designed for use with various lawn mowers and ride-on mower/tractor models and is sold individually. This locknut attaches to the end of the carriage bolt and is an important component to the axle assembly. This locknut has a 3/8-inch inner-diameter and is 16 threads-per-inch. To repl...Read moreace this locknut, you will need a wrench, and if there are multiple locknuts on your equipment, they may all need to be replaced.

The E-Ring 7/16 is a 7/16-inch silver, metal part which can be attached to various locations on a variety of equipment to snap into grooves and secure parts into place. This part will require pliers to install. If broken, damaged or worn, there may be a problem with the part it is securing and the part should be replaced. Refer to your make, model and diagrams to check if this is the right part.

This part has been sourced from the original manufacturer and is intended to be used with walk-behind lawnmowers from Husqvarna, Poulan, Weed Eater, and Jonsered. The metal pawl is used to secure the pinion to the transmission axle to allow the two parts to rotate in unison. This drive pawl is priced as a single item, please note two may be needed.

This is a genuine Craftsman part for use with Lawn Mowers. The drive gear attaches on the inner side of the drive wheel. The drive gear meshes with the pinion in the drive wheel to propel the mower. The most common reason for replacing the gear is when the self-propel system will not drive one or both wheels. This part is sold individuall...Read morey. The tools that you will need to replace the gear is a 12mm socket and snap-ring pliers.

This washer is not part of a kit or assembly. It is sold individually. With an O.D. of 1 inch, this OEM replacement part is made of dark grey metal and is used to provide a tight seal between the mower blade and the blade bolt/screw. This part should be replaced if you notice any visible wear, warping, or damage. You will need a wrench or socket set to complete this repair. Customers rate this repair as Easy.

This is a genuine manufacturer-sourced replacement screw which is specially designed for use with Craftsman lawn and garden equipment. It is a standard hardware which has multiple applications depending on the model of your unit, please refer to the appropriate diagrams for the correct location and use of this item. This part is made of h...Read moreigh-quality metal and it is sold individually, you will need a wrench to secure or remove it.

A genuine item that is supplied by the original equipment manufacturer for use with lawn and garden equipment. It is a high-quality screw which has a few different applications depending on the model of your unit, please refer to the appropriate diagrams for the correct location and application of this hardware. Keep in mind this durable metal component is sold individually.